738655

Midland CT2000 Manual

24
Zoom out
Zoom in
Previous page
1/38
Next page
20 | Midland CT2000 instruction guide
mike or of the radio to switch from frequency to channel mode.
• Select the channel to delete;
• Press FUN + V/M: the channel will be cancelled.
Scan function
CT2000 has 3 types of scanning:
• TO- Time-Operated scan: everytime a signal is detected, the radio will stop
scanning for a few seconds, then it will start scanning again on the other
frequencies even though the signal is still present.
• CO – Carrier-Operated scan: whenever a signal is detected, the radio will
stop scanning and will resume only after the signal disappears.
• SE – Search scan: the radio will stop scanning once a signal is picked up.
To select the desired type of scan, access the radio menu and follow these
steps: MENUUtilitiesRadio SettingScan Mode.
• Select the desired parameter.
• To start scanning press the F button on the mike and then [1].
• To change the scan direction use the UP/DOWN keys on the microphone.
• To stop scanning press FUN.
• When the PTT is pressed the scan and the transmission on the frequency
where the scan picked up a signal, will stop.
Note: the scan can also be activated through the radio menu. To start scanning
select: MENUScan
Selective call
You may sometimes want to hear calls from only specific persons or groups.
In this case, use the selective call function. This transceiver is equipped with
CTCSS tones and DCS codes. These selective calls allow you to ignore (not
hear) unwanted calls from other persons who are using the same frequency.
The transceiver unmutes only when it receives the signal having the same
CTCSS tone or DCS code.
CTCSS and DCS do not make your conversation private or scrambled. It only
relieves you from listening to unwanted conversations.
Setting CTCSS or DCS tones
Setting a CTCSS or DCS tone in tx.
• Press the MENU control on the microphone or keep pressed the F button
on the front panel of the radio to enter the radio menu;
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info