Manual Midland bt2 intercom (page 11 of 23) (English)

232783

Zoom out

Zoom in

1/23

English

is in progress. However, it is possible to add other parties to

the conversation by simply enabling the 3-way communication

feature. After the initial call has been established, brieﬂy press

the “Intercom” button on the BT2 device that has received the

call (you will hear an audio conﬁrmation tone). To re-establish

a private conversation, press the “Intercom” button again (you

will hear two audio conﬁrmation tones).

Using the MP3 player feature of the cell pho-

Many cell phones are now designed to be used as stereo MP3

players. Your Midland BT2 fully supports the A2DP and AVR

CP protocols that enable you to listen to stereo music and

remotely control your cell phone’s MP3 player.

You can even use the buttons on the BT2 unit to control the

following play options:

Play, Pause, Forward and Backward.

Attention: The remote control is enabled only if the MP3

player device supports the AVRCP protocol.

Available controls:

› To enable your connected MP3 Player, press and hold down

the “Intercom” button for 3 seconds.

› To play/pause music, brieﬂy press the “Intercom” button.

› To skip forward to the next song, brieﬂy press the “Telepho

ne” button.

› To skip backwards to the previous song, brieﬂy press the

“AUX” button.

› To disable the MP3 player, press and hold down the “Inter

com” button for 3 seconds (2 beeps will conﬁrm it).

To open the Intercom communication just talk or , for a manual

activation, disable ﬁrst the MP3 player , pressing the “Inter

com” button and than press it again to open the Intercom.

The music listening mode has the lowest priority com

pared to other connections (such as phone calls or In

tercom conversations). Therefore, the music will always

be disabled when another type of communication is ena

bled.

Using the features of your GPS sat-nav

To use the features of your GPS Sat-Nav, be sure both units

are turned on and correctly paired together, following the pai

ring procedure described in the “Pairing the unit with a GPS

Sat-Nav” section.

Priority: communications with the GPS Sat-Nav have the hi

ghest priority, which means that the enabling of these commu

nications causes the temporary disabling of all other commu

nications (Intercom, music or two way radio transceiver). Once

the GPS communications have ended, all other communica

tions are automatically reenabled.

Listening to voice instructions from your GPS Sat-Nav

Trafﬁc directions from your GPS Sat-Nav will always be im

mediately transmitted by temporarily disabling all other acti

ve communications. Once these voice directions have been

transmitted, your BT2 will automatically re-enable all existing

communications.

Listening to music from your GPS Sat-Nav

The most popular GPS devices usually enable you to listen

to music when no directions are being given. In this case, the

communication with the GPS is always active and has the hi

ghest priority compared to all other active devices.

However, it is possible to enable the Intercom feature at any

time, while listening to music, simply by pressing the “Inter

com” button to open a 3 way communication. For further in

formation, see the “3-way communications with the GPS Sat-

Nav” section below.

Using a cell phone with a GPS Sat-Nav

If you have connected a GPS Sat-Nav to your Midland BT2,

you will not be able to connect the cell phone directly to the

unit; you must instead, connect the phone to the GPS Sat-

Nav. By doing so, all the cell phone features will be managed

directly by your GPS Sat-Nav. For information on how to pair

a cell phone and answer/make calls, see the manual supplied

with your particular Sat-Nav.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - German, French, Italian, Spanish - 146 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland bt2 intercom Manual

Product: