232783

Midland bt2 intercom Manual

12
Zoom out
Zoom in
Previous page
1/23
Next page
12
3-way communications with your GPS Sat-Nav
The Intercom feature is temporarily disabled when commu
-
nication with your GPS Sat-Nav is active (street indication or
music). However it is possible to allow the passenger to listen,
by enabling a “3-way communication”.
When the communication with the GPS is active, briefly press
the “Intercom” button on the BT2 device connected to the GPS
Sat-Nav (you will hear an audio confirmation tone). The Pas
-
senger will now be able to listen to the same information/music
that the rider hears. To return to the private mode, press the
“Intercom” button once more (You will hear two audio confir
-
mation tones).
Using other bluetooth devices
Midland BT2 can also be paired with other Bluetooth devices
like MP3 players, Bluetooth adapters (for example BPA100) or
Two Way Radio transceivers with built-in Bluetooth.
This can be a great advantage as it is possible to then increa
-
se your “Bike to Bike range” up to 3 Miles!
To use these devices, be sure your BT2 and other device are
both turned on and correctly paired together, following the
pairing procedure described in the “Pairing the unit with other
Bluetooth devices” section.
Paired devices can be enabled or disabled without canceling
the pairing by simply pressing the “AUX” button.
› Disabling: press “AUX” button for 3 seconds (you will hear
two audio confirmation tones)
› Enabling: press “AUX” button for 3 seconds (you will hear
one audio confirmation tone)
In this case the device is simply temporarily disconnected from
the BT2 unit, although the devices continue to be paired.
Priority: communications with other Bluetooth devices
have a lower priority compared to those established with
a cell phone, GPS Sat-Nav and Intercom system. This
means that communications will always be disabled
when a call arrives, when the GPS Sat-Nav transmits in
-
structions, or when the Intercom feature is enabled.
Attention: if you use your GPS Sat-Nav to listen to music
(the communication with the GPS Sat-Nav is always acti
-
ve), all communications with other Bluetooth devices will
be disabled, as they have a lower priority.
Using a Bluetooth MP3 player
The Midland BT2 fully supports the A2DP protocol that ena
-
bles you to listen to stereo music and manage the main fea
-
tures of your MP3 player. It’s even possible to use the buttons
on the BT2 unit to manage the following play features: Play,
Pause, Forward and Backward.
Available controls:
› To enable your connected MP3 Player, press and hold down
the “Intercom” button for 3 seconds.
› To play/pause music, briefly press the “Intercom” button.
› To skip forward to the next song, briefly press the “Telepho
-
ne” button.
› To skip backwards to the previous song, briefly press the
“AUX” button.
› To disable the MP3 player, press and hold down the “Inter
-
com” button for 3 seconds (2 beeps will confirm it).
To open the Intercom communication just talk or , for a manual
activation, disable first the MP3 player , pressing the “Inter
-
com” button and than press it again to open the Intercom.
It is not possible to guarantee the full compatibility with
all the MP3 Bluetooth player in the market, because they
often use different or proprietary procedures.
Using a Bluetooth adapter:
Your Midland BT2 can be connected to an external Bluetooth
adapter (such as a BPA100) to use with audio devices without
built-in Bluetooth connection (like Two Way radio transceivers
or older GPS variants).
Using a Bluetooth Enabled Two Way Radio
The Midland BT2 can be connected to Bluetooth Enabled Two
Way Radio and used for bike to-bike communications. Pair
your BT2 with the Radio, as described in the “Pairing the unit
with other Bluetooth devices” chapter, then enable the Blue
-
tooth connection by pressing the button on the radio. This
will then allow you to transmit over much greater distances,
with more people at once, while still enjoying the flexibility and
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland bt2 intercom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - German, French, Italian, Spanish - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info