232783
13
Zoom out
Zoom in
Previous page
1/23
Next page
13
English
freedom of movement afforded you by the wireless Bluetooth
Connection.
Using the wired audio input
Your Midland BT2 is also fitted with a wired audio input (labe-
led AUX), that can be used to connect a stereo audio source,
like an iPod (or any other MP3 Player) or a GMRS transceiver
for bike-to-bike communications.
Priority: the wired audio input has the lowest priority
when compared to the other Bluetooth connections (in
-
cluding the Intercom) and will therefore always be disa
-
bled when another Bluetooth communication is opened.
Listening to music
To listen to music from the wired input, connect the audio
source using the cable supplied with the BT2 unit. The volu
-
me level is automatically adjusted by the AGC system, which
means that you only need to adjust the volume of your iPod/
MP3 player to a level that will allow you to listen to music in
normal speed.
Attention: never set the volume of the MP3 Player to the
maximum possible.
Hint: We recommend that you perform a few tests adjusting
the volume of your iPod/MP3 player so at the normal speed
the Headset volume is suited to your needs.
The AGC system will automatically increase the volume on
higher speed. Make a note to remember this setting for future
trips.
Attention: the volume adjustment, (“Volume+” and “Vo
-
lume –“) buttons, cannot be used to adjust the volume of
the wired audio source (eg MP3 player), only the volume
of the BT2 that the device is connected to.
Enabling/disabling the wire input
The wire input can be enabled and disabled by means of the
“AUX” button.
› Disabling: briefly press the “AUX” button (you will hear two
audio confirmation tones).
› Enabling: briefly press the “AUX” button (you will hear one
audio confirmation tone).
Using a Two Way Radio transceiver
To be able to use the transceiver, it is necessary to purchase
a specific cable (sold separately) in order to connect the radio
to your Midland BT2:
› Note: Some manufacturers radios use a different pin
configuration, so we recommend that you ask your
dealer as to which cable is best suited to your needs
To communicate via the attached radio, press the transmis
-
sion Press to Talk (PTT) button to speak and release it to li
-
sten. It is not possible to talk and listen simultaneously. The
cable connected to the transceiver has a PTT button that can
be placed on the handlebar of your bike or held in your hand
(If you are the Passenger rider).
Adjust the volume of the transceiver to your needs, remembe
-
ring that the volume adjustment is controlled by the automatic
AGC system and that it will therefore be automatically increa
-
sed in relation to background noise.
Special configurations
Your Midland BT2 can be configured with customized settings
to suit the needs of even the most demanding bikers.
In particular, expert users may configure the following “advan
-
ced” features:
› Permanently enable 3-way communications
› Voice enable Intercom (VOX)
Adjust the microphone sensitivity
Disable the VOX feature
Permanently enabling 3-way communications
Bluetooth communications with a (low) priority and audio com-
munications transmitted by the wired connection are usually
disabled when the Intercom feature is enabled. By enabling
this feature, you can maintain active communications while
simply transferring the low priority feature to the other user
(eg Passenger).
This feature can be useful, for example, if you wish to main
-
tain Intercom communications and simultaneously talk using
a transceiver radio connected via Bluetooth or wired connec
-
tion.
In addition it also allows you to share the music between Rider
and Passenger. Considering that the music quality is “mono
for the second person who will share the music (see the chap
-
ter “Share the music between driver and passenger” below).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland bt2 intercom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - German, French, Italian, Spanish - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info