Manual Midland ALAN HM06 (page 13 of 20) (English)

738665

Zoom out

Zoom in

1/20

English

5.7 Transmission

1) Remove the microphone from the support.

2) Verify that the channel is free (to prevent potential interference)

and check that the status LED

[9] on the right of the display is

off.

3) Press and hold down the palm-sized microphone transmission

key

(PTT). The status LED turns red.

4) Speak normally at a distance of 5-10cm from the microphone.

5) Release the

PTT key at the end of the call making sure that the

status LED switches off.

6) At the end of the conversation, place the microphone back onto

its support.

2 StarttalkingonlyafterpressingthePPTkeyandreleaseitonly

aftertheconversationhasended,otherwisethetransmissionof

themessagemaybeincomplete.

2 Donotshout!Shoutingdoesnotincreasethetransmissiondis-

tancebutaffectsthequalityofthesignalreceived.

2 Transceiverscannotgenerallybeusedtolistenandtalksimulta-

neously.Forthisreason,youwillnotbeabletotalkwhenothers

aretalking.Itisthereforeadvisabletotimeyourmessagessothat

theyarenottoolong.

2 For information on how to transmit correctly, see the following

paragraphs.

5.7.a Maximum Time Out Timer (TOT)

The radio has a programmed Time Out Timer that automatically

enables the reception mode if the speaker's message exceeds a

specictimelimit.Thesettingofthistimercanbeconguredduring

the programming phase. If this occurs, release the transmission key

and wait a few seconds to allow the radio transmission feature to be

automatically reset. For additional information, contact the radio link

provider or your local dealer.

2 Thissettingcannotbechangedbytheuser.Formoreinformation,

contacttheradiolinkprovider.

5.7.b Blocking transmission when the channel is busy (BCLO)

If enabled, this feature prevents the transmission of outgoing signals

if the channel is busy. In this case the use of the

PTT key has no

effect.

Depending on programming, the BCLO feature can be enabled for all

signalsandforsignalswithaspecicCTCSS/DCScode/tone.

2 Thissettingcannotbechangedbytheuser.Foradditionalinfor-

mation,contacttheradiolinkprovider.

5.7.c Selecting the transmission strength

Thetransceivercantransmitwiththetransmissionstrengthscong

ured during the programming phase for each channel. The red LED HI

indicates that the following strength has been selected:

• On - High strength

• Off - Low strength

Tochangethestrengthofaspecicchannel,selectitandpressthe

F key (or ) linked to this feature. The red HI LEDconrmsthatthe

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland ALAN HM06 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland ALAN HM06 Manual

Product: