451459

Metabo KS 254 Plus Manual

22
Zoom out
Zoom in
Previous page
1/56
Next page
2.7
KS 250
Standard cross cuts
Starting position:
- Sawhead fully lifted
(if necessary, pull out locking pin);
- Turntable locked in 0° -position;
- Saw blade is in vertical position to the saw table.
1. Hold workpiece against the fence.
2. Depress and hold down the ON/OFF switch.
3. Push sawhead release button and lower saw-
head, holding it at the saw handle.
3
For sawing exert only so much downward
pressure that the motor speed does not fall off
too much.
4. Cut workpiece in a single pass.
5. Release ON/OFF switch and return sawhead to
its upper rest position.
Mitre cuts
3
With a mitre cut the workpiece is cut at an
angle of 0° to 45° against the rear guide edge.
Starting position:
- Sawhead fully lifted
(if necessary, pull out locking pin);
- Saw blade is in vertical position to the saw table.
1. Loosen adjusting lever for turntable (counter-
clockwise);
2. push catch down;
3. Set turntable to required angle.
The scale on the saw table indicates the set
angle.
4. Release catch and tighten adjusting lever.
Bevel cuts
3
With a bevel cut the workpiece is cut at an
angle between 0° and 45° to the vertical axis.
Starting position:
- Sawhead fully lifted
(if necessary, pull out locking pin);
- Turntable locked in 0° -position;
1. Loosen sawhead tilt lock lever on rear of saw.
2. Tilt sawhead to required angle.
3. Tighten lock lever.
The actual cutting operation is the same as
described under "Standard cross cuts".
45°-0°
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KS 254 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KS 254 Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info