451459

Metabo KS 254 Plus Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
2.5
KS 250
4. Fit the table extension, on the left-hand side of
the saw, into the two outer holes – the offset
side of the table extension must point towards
the saw as shown.
5. Slide retaining bracket (arrow) from underside of
the saw over one of the two inner holes: the
holes in the retaining bracket and in the saw's
base must be lined up exactly.
6. Push table extension in, all the way to the stop.
7. Tighten screw on the retaining bracket.
8. Repeat step 4 to 7 on the saw's right-hand side
correspondingly.
9. Stand saw back on its feet.
Fence plate installation
· Screw fence plate to fence stop with thumb
screw as shown.
Work clamp installation
· Put the work clamp in one of the holes in the saw
base.
Fixing the saw
A
Risk of personal injury by rocking or tilt-
ing saw!
For a safe operation the saw must be fixed to
a sturdy base.
· A permanently mounted work plate or a work
bench can serve as a base.
· The saw can also – for mobile application – be
screwed to a plywood or wood-core plywood
sheet (800 mm x 800 mm, at least 19 mm thick).
When in use this plywood sheet must then be
secured with G-cramps to a work bench.
1. Drill four holes into the base.
2. Attach the saw with screws to the base.
Dust bag installation
A
Danger!
Dust of certain timber species (e.g. oak,
beech, and ash) can cause cancer when
inhaled:
- Work only with dust bag properly installed
or a dust collector connected (air speed at
the saw's dust spout ³ 20 m/s).
- Wear a dust mask in addition, as not all
saw dust is collected or extracted respec-
tively.
- Empty the dust bag regularly. Wear dust
mask when emptying.
· Put the dust bag onto the dust spout of the mitre
saw (ensure the dust bag's zipper is closed).
· Else connect a dust collector or industrial vac-
uum with a suitable adapter to the saw's dust
spout.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KS 254 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KS 254 Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info