Manual Metabo HDM 1000 (page 27 of 56) (English, German, Dutch, French)

451429

Zoom out

Zoom in

1/56

Advance the copying chisel, holding it at a 90˚ angle

against the workpiece.

The depth is limited with the adjustable depth stop.

Remove toolrest from toolrest holder and place the

support table into the toolrest holder. Set support table

close to the sanding disc (approx. 2 - 3 mm).

Lock the headstock spindle with the lock bar supplied

and screw the disc onto the spindle thread.

17 Disc Sanding Attachment

With the disc sanding attachment only minor sanding

jobs should be carried out, as adequate dust collecting

is not possible. Always wear a face mask when using the

disc sanding attachment.

The dust of beech and oak is carcinogenic!

It is recommended that the dust concentration in the

workshop does not exceed 2 mg/m

17.1 Sanding Discs

Remove the protective foil from the back of the self-adhesive sanding disc and stick to the disc, which has been

cleaned from all dust.

If the sanding disc needs to be replaced, simply put another sanding disc over it. This second sanding disc is then

easily removed by pulling it off when replacement is necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HDM 1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo HDM 1000 Manual

Product: