657614
31
Zoom out
Zoom in
Previous page
1/129
Next page
31
e
f
g
h
RockShox Maxle 360™
Mounting wheels
If your bike is equipped with a Maxle thru-axle system
with quick-release lever, put the front wheel into the fork
and mount the rotor in the brake caliper.
Bring the front wheel into the right position between the
drop-outs and slide the axle with open Maxle quick-re-
lease levers from the right side through the drop-out and
the hub
(e)
.
Make sure the quick-release lever is completely open
(f)
and lies in the axle recess. As soon as the axle thread
engages with the thread of the left fork leg, close the
axle by turning it clockwise. During the first rotations you
should be able to rotate the thru axle nearly without re-
sistance.
Now turn the lever forcefully clockwise until the axle is
hand-tight. Make sure the quick-release lever does not
slip out of the axle recess during tightening.
Finish by closing the Maxle thru axle quick-release lever
like a usual quick-release lever
(g)
. The quick-release
lever should not stand out to the front and should fit
snugly against the lower leg.
Dismounting wheels
If your bike is equipped with a Maxle thru-axle system,
open the quick-release lever completely.
Make sure the open quick-release lever lies in the axle
recess.
Open the thru axle by turning counterclockwise. Make
sure the open quick-release lever does not slip out of the
axle recess during opening.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely.
i
More information are provided at
www.rockshox.com
Fox E-Thru 15 QR
Mounting wheels
If your bike is equipped with a Fox E-Thru 15 mm sys-
tem, put the front wheel into the fork and mount the ro-
tor in the brake caliper.
Bring the front wheel into the right position between the
drop-outs and slide the axle with open E-Thru quick-re-
lease lever from the left side through the drop-out and
the hub
(h)
.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info