657614
29
Zoom out
Zoom in
Previous page
1/129
Next page
29
e
f
g
h
Manitou Hex Lock QR15 (e.g. Manitou Mattoc and
Marvel)
The Manitou Hex Lock system
(e)
can be adjusted
without tools and locked with a quarter turn after wheel
mounting.
In contrast to the QR15-axle there is no need to unfold
the lever and to unscrew the axle with difficulties. The
only thing you have to do is to unfold the quick-release
lever, to move it by a quarter turn and the axle is free.
The special feature is located at one end of the axle: the
two pins which are designed to lock the axle in a respec-
tive guide in the drop-out.
Bring the front wheel into the right position between
the drop-outs. Insert the axle with the Hex Lock
quick-release lever open from the right through the
drop-out and the hub
(f)
. The marking on the axle
must show towards the fork crown, i.e. upwards.
The hex must slide into the left fork leg.
Once the axle is fully inserted, turn the axle until the two
pins engage. Close the quick-release subsequently
(g)
by applying the force usually necessary for closing a
quick-release.
i
More information are provided at
www.manitoumtb.com
Marzocchi 20mm Taperwall axle (e.g. Marzocchi
888 CR 180)
Mounting wheels
If your bike is equipped with a Marzocchi 20mm Taper-
wall thru-axle system
(h)
, put the front wheel into the
fork and mount the rotor in the brake caliper.
Bring the front wheel into the right position between the
drop-outs. Insert the thru axle from the left through the
fork and the hub.
Tighten a little the counterpart of the axle/bolt cap with
an Allen key. Then tighten by using a torque wrench to a
torque of 14 to 16 Nm.
After mounting the axle compress the fork a couple of
times to make sure the axle is not jammed.
Lift your MERIDA bike a little and spin the front wheel.
The front wheel must rotate freely in the area of the tire,
the rim and the rotor.
Finish by tightening the four Allen bolts at the front of the
fork by using a 4-mm Allen key to a torque value of 5 to
7 Nm. This will ensure the clamping of the axle.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info