657614
32
Zoom out
Zoom in
Previous page
1/129
Next page
32
a
b
c
d
As soon as the axle thread engages with the thread of
the right fork leg, close the axle by turning it clockwise
(a)
. During the first rotations you should be able to rotate
the thru axle nearly without resistance. Tighten the axle
a little.
Close the E-Thru quick-release lever like a usual
quick-release lever
(b)
.
At the beginning you should feel virtually no resistance
and clamping effect. When the lever is at right angle the
resistance you feel should increase significantly and to-
wards the end you should need even more strength to
close the lever.
If the lever cannot be closed completely, re-open it and
turn the axle a little counterclockwise. Try again to close
the quick-release lever
(c)
.
Use the palm of your hand to push it in all the way while
your fingers pull on the fork leg, but not on a spoke or
the rotor.
In its end position the quick-release lever should be
tight so that it can no longer be turned. Make sure the
quick-release lever does not stand out to the front or to
the side. The best closing position is in nearly upright
position in front of the lower leg
(d)
.
Dismounting wheels
If your bike is equipped with a Fox E-Thru 15 mm th-
ru-axle system, open the quick-release lever complete-
ly. Open the thru axle by turning counterclockwise.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely.
i
More information are provided at
www.ridefox.com
SR SUNTOUR Q-LOC2 15QL C2 (e.g. SR SUNTOUR
Auron LO-RC)
Mounting wheels
If your bike is equipped with an SR SUNTOUR Q-LOC-
system 15 mm, put the front wheel into the fork and
mount the rotor in the brake caliper, if necessary. Bring the
front wheel into the right position between the drop-outs.
Open the quick-release lever of the SR SUNTOUR thru
axle completely. Turn the counter nut on the thru axle
counterclockwise until the expander releases.
Slide the axle with open quick-release lever and re-
leased expander from the right side through the drop-
out and the hub until the thru axle engages with a clear
“click”. Now turn the quick-release lever forcefully
clockwise until the axle is hand-tight.
Finish by closing the quick-release lever like a usual
quick-release lever. Make sure the quick-release lever
does not stand out to the front or to the side.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info