Manual McCulloch CS 42S (page 12 of 536) (All languages)

684233

Zoom out

Zoom in

1/536

NOTE: Before felling cut is complete, use wedges to

open the cut if necessary to control the direction of

fall. To avoid kickback and chain damage, use wood

or plastic wedges, but never steel or iron wedges.

Be alert to signs that the tree is ready to fall: cracking

sounds, widening of the felling cut, or movement in the

upper branches.

As tree starts to fall, stop saw, put it down, and get

DZD\TXLFNO\RQ\RXUSODQQHGUHWUHDWSDWK

DO NOT cut down a partially fallen tree with your saw.

Be extremely cautious with partially fallen trees that

may be poorly supported. When a tree doesn’t fall

completely, set the saw aside and pull down the tree

with a cable winch, block and tackle, or tractor.

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the

desired log size.

a WARNING! Do not stand on the log being

cut. Any portion can roll causing loss of

footing and control. Do not stand downhill of

the log being cut.

IMPORTANT POINTS:

 Cut only one log at a time.

 Cut shattered wood very carefully; sharp pieces of

ZRRGFRXOGEHÀXQJWRZDUGRSHUDWRU

 Use a sawhorse to cut small logs. Never allow

another person to hold the log while cutting and

never hold the log with your leg or foot.

 Do not cut in an area where logs, limbs, and roots

are tangled such as in a blown down area. Drag

the logs into a clear area before cutting by pulling

RXWH[SRVHGDQGFOHDUHGORJV¿UVW

 Make sure the chain will not strike the ground or

any other object during or after cutting.

a WARNING! If saw becomes pinched or hung

in a log, don’t try to force it out. You can lose

control of the saw resulting in injury and/

or damage to the saw. Stop the saw, drive a

wedge of plastic or wood into the cut until

the saw can be removed easily. Restart the

saw and carefully reenter the cut. To avoid

kickback and chain damage, do not use a

metal wedge. Do not attempt to restart your

saw when it is pinched or hung in a log.

TYPES OF BUCKING CUTS

Overcutting begins on the top side of the log with the

bottom of the saw against the log. When overcutting

use light downward pressure.

Undercutting involves cutting on the underside of the

log with top of saw against the log. When undercutting

XVHOLJKWXSZDUGSUHVVXUH+ROGVDZ¿UPO\DQG

maintain control. The saw will tend to push back

toward you.

a WARNING! Never turn saw upside down to

undercut. The saw cannot be controlled in

this position.

$OZD\VPDNH\RXU¿UVWFXWRQWKHFRPSUHVVLRQVLGHRI

the log. The compression side of the log is where the

pressure of the log’s weight is concentrated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch CS 42S in the language / languages: All languages as an attachment in your email.

The manual is 20,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch CS 42S Manual

Product: