634678
29
Zoom out
Zoom in
Previous page
1/80
Next page
29
6. Connections and Control Elements
Stereo Channels
1) Stereo inputs
The stereo channel is equipped with two symmetrical (balanced) 6.3mm LINE jack sockets
to which a device with a STEREO-LINE output can be connected. This socket can also be
connected to asymmetric (unbalanced) jacks. In this case, use short cables to avoid the
danger out outside interference as far as possible.
If the channel is to be used as a mono channel, only use the L (MONO)
socket. The channel now works as a mono channel.
2) FX control (ME1002 and ME1202)
The function of the FX controllers for the stereo and mono channels are identical. Therefore,
please also observe the notes on the FX control as described for the mono channel. The FX
signal of the stereo channel is mixed into a mono signal because further FX SEND process-
ing is performed in mono.
3) BAL control
This BAL control is used to set the level ratio between the left and right input signal before it
is put on the MAIN MIX bus. The BAL control works like the PAN control in the mono chan-
nels, except that it works in stereo.
4) Channel control (LEVEL control)
The stereo channel level as compared to the overall signal (MAIN OUT) is set with the
channel control. The channel control should always be returned to the “-” position when
the channel is not used.
5) CLIP LED
The CLIP LED (ME1002 and ME1202) can be used to visually monitor the input level of the
stereo channel. To prevent overmodulation or distortion of the signal, the CLIP LED should
not light up. Reduce the signal source level accordingly. Also see +4/-10 switch.
6) +4/-10 switch
The +4/10 switch (ME1002 and ME1202) can be used to set the input sensitivity of the
stereo channel. Selection is possible between the home recording level (-10 dBV) and stu-
dio level (+4 dBu). Select home recording level (-10 dBV) for connection of entertainment
electronics devices (e.g. CD player, MP3 player). Select studio level (+4 dBu) when con-
necting devices from the professional PA range.
MONO
L
R
BAL
OR
UNBAL
0
- +15
8
LR
BAL
FX
CLIP
0
- +15
8
LEVEL
+4
-10
LEVEL
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt ME 1202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt ME 1202 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info