634678

Mc crypt ME 1202 Manual

31
Zoom out
Zoom in
Previous page
1/80
Next page
31
6. Connections and Control Elements
3) TAPE TO CTRL switch (ME1002 and ME1202)
Press the TAPE TO CTRL switch to put the CD/TAPE IN signal on the CONTROL ROOM
output, the headphones socket and the LED level display. If this switch is pressed, only the
CD/TAPE INPUT signal is put on the CONTROL ROOM output and the headphones output.
This switch can thus be used to check the recording signal.
The TAPE TO CTRL switch has no function if the FX TO CTRL switch is
pressed. The FX TO CTRL switch takes precedence.
4) CD/TAPE TO PHONES switch (ME502FP)
Press the CD/TAPE TO PHONES switch to put the CD/TAPE IN signal on the headphones output and the LED
level display. If this switch is pressed, only the CD/TAPE INPUT signal is put on the headphones output. This
switch can thus be used to check the recording signal.
5) TAPE TO MIX switch (for ME502FP CD/TAPE TO MIX)
Press the TAPE TO MIX switch to send the CD/TAPE IN signal to the MAIN MIX bus. The CD/TAPE IN socket is
now used as an additional STEREO LINE input.
If a recording is made via the CD/TAPE OUT sockets and listened to via the CD/TAPE IN sock-
ets, the TAPE TO MIX switch must not be pressed. There is a danger of feedback.
MAIN Section and LED Level Display
1) PHANTOM switch
For operation of a condenser microphone, a phantom voltage can be applied to the
XLR sockets. This switch is used to switch the PHANTOM voltage +48V on or off
for all MIC sockets. If operation of the microphone does not require phantom volt-
age, switch it off before connecting the microphone. Press this button to switch on
phantom voltage. The +48V LED is lit when the PHANTOM voltage is switched on.
To avoid damage to the connected devices, the PHANTOM switch must only be operated if the
mixer is switched off.
Use the PHANTOM voltage for condenser microphones only. Only use symmetric cables for
connecting a condenser microphone.
TAPE
TO MIX
TAPE
TO CTRL
PHANTOM
+48 V
POWER
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt ME 1202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt ME 1202 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info