634678
27
Zoom out
Zoom in
Previous page
1/80
Next page
27
6. Connections and Control Elements
Mono Channels
1) MIC input
This symmetric (balanced) XLR socket is intended for microphone connection.
For operation of a condenser microphone, a phantom voltage of +48 VDC can be applied
to the XLR socket.
Microphones or devices that do not require any phantom voltage may be
damaged by it (see phantom switch).
2) LINE input
Symmetric (balanced) 6.3mm LINE jack socket for connection of an instrument or device
with LINE output (keyboard, synthesizer, etc.). This socket can also be connected to an
asymmetric (unbalanced) mono jack. In this case, use short cables to avoid the danger out
outside interference as far as possible.
Only the MIC- or LINE socket of a channel must be used. Never use both
inputs of a channel at the same time.
3) TRIM control
The TRIM control sets the channel’s input sensitivity. The differently high signals of the individual channels can
thus be pre-ampli ed and adjusted to each other. Turn the control to the left stop before connecting a device to
the input socket or disconnecting it.
4) Equalizer
Every mono channel is equipped with a 3-band equalizer (2-band equalizer ME502FP). The
HIGH, MID and LOW control can be used to lift or lower the high, middle and low tones of
the respective input signal. The control range is at +/-15dB (12kHz / 2.5kHz / 80Hz). The
control position “0” leads to neutral sound reproduction.
MIC
LINE IN
BAL
OR
UNBAL
00
+10
+10
-40
+60
TRIM
dB/dBu
0
-15 +15
0
-15 +15
0
-15 +15
HIGH
12 KHz
EQ
MID
2.5 KHz
LOW
80 Hz
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt ME 1202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt ME 1202 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info