634678

Mc crypt ME 1202 Manual

28
Zoom out
Zoom in
Previous page
1/80
Next page
28
6. Connections and Control Elements
5) LOW CUT switch (ME1002 and ME1202)
This switch activates and deactivates the LOW CUT fi lter of the mono channel. The
LOW CUT fi lter is active when the switch is pressed. This fi lter suppresses undesired
low-frequency signals. The frequency range below 75Hz is lowered by –3dB (18dB/oct.,
-3dB at 75 Hz).
6) FX control (ME1002 and ME1202)
The FX control is used to mix a separate output signal at the SEND FX socket. The signal
for the FX control is output downstream (POST fader) of the channel control. Changes at
the channel control will infl uence the FX output signal. It is therefore suitable for controlling
an effect device. The processed FX effect signal can be returned through the normal chan-
nel inputs. The FX signal is a mono signal and can be amplifi ed up to +15dB.
Please observe that the signal at the SEND FX socket is also infl uenced by the FX SENDS
control. See FX SENDS control.
If the FX sum signal is to be returned through a mono or stereo channel, the FX control for the
channel must be at the left stop. If the FX control is not at the left stop, there is a danger of
feedback.
7) PAN control
The PAN control determines distribution of the mono signal to the right and left channel of the STEREO outputs.
In the middle position, the signal is sent to both outputs.
In the “R” position, no signal is put on the left output.
In the “L” position, no signal is put on the right output.
8) Channel control (LEVEL control)
The mono channel level as compared to the overall signal (MAIN OUT) is set with the channel control. The chan-
nel control should always be returned to the “-∞” position when the channel is not used.
9) CLIP LED
The CLIP LED can be used to visually monitor the input level of the mono channel. To prevent overmodulation
or distortion of the signal, the CLIP LED should not light up. Turn the TRIM control back and check the equalizer
control settings for the channel if required.
0
- +15
8
LR
PAN
FX
CLIP
0
- +15
8
LEVEL
LOW CUT
75Hz
18 dB/Oct
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt ME 1202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt ME 1202 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info