778510

Maxxtools 20570 Manual

14
Zoom out
Zoom in
Previous page
1/22
Next page
OPERATING INSTRUCTIONS
Please read and save these instructions. Read through this owner’s manual carefully before using
product. Protect yourself and Others by observing all safety information, warnings and cautions.
Failure to comply with instructions could result in personal injury and/or damage to product or
property. Please retain instructions for future reference.
CAUTION: The operator of this machine is advised that reactive torque may occur when the
rotating auger makes contact with hard debris. Therefor a rm hold with both hands is essential.
PETROL ENGINE
Specic Safety Instructions
Petrol or diesel powered engines must never be used in unventilated or closed spaces. The
exhaust fumes are highly dangerous and can cause ‘Carbon Monoxide Poisoning’ which will
cause drowsiness and death.
The engine must not be run at speeds that exceed the maximum stated on the rating plate.
Operating an engine at excessive speeds increases the hazard of personal injury.
Do not tamper with components, which may increase or decrease the governed speed.
Never leave the engine running unattended near a building or near canvas or plastic structures
ie. tents etc. Always use the correct fuel as stated in the user manual and on the rating plate.
To prevent re, always stop the engine when refuelling and never over ll the fuel tank.
Always clean up spilt fuel immediately using sand.
DO NOT run the engine in or near an explosive atmosphere.
Check the fuel system periodically for leaks. Seals and hoses should be checked for signs of
deterioration or chang. Check for loose or missing clamps damaged fuel tank or ller cap. All
defects should be corrected before further use.
Do not allow the engine to run out of fuel.
Before transporting in a vehicle, drain all fuel to prevent leakage.
Store the engine in a well-ventilated area with the tank empty.
HOLE BORER
Specic safety instructions
Before using the hole borer the operator must be informed of the manufacturers safety instructi-
ons and instructions for use. The machine must only be operated by a trained person.
Use the hole borer only in daylight or in good articial light.
Always start the hole borer carefully with your feet well away from the auger bit.
Do not leave the hole borer unattended when the engine is running.
Do not use the hole borer barefoot or in open toed sandals. Always wear suitable clothing,
gloves and safety shoes.
Use the hole borer in soil only, do not use to bore holes in excessively rocky ground.
Do not bore holes in an area where there may be hidden gas and water pipes or electricity
and other cables. Check with local authorities before commencing.
Ensure the auger bit is attached to the gearbox output shaft securely.
Do not use a damaged or worn auger bit.
Do not carry the auger with the engine running, the auger bit should not rotate when the engi-
ne is idling.
Keep hands and feet away from the rotating auger bit at all times.
Always ensure that the engine is switched off and the spark plug cap is removed before making
any adjustments.
Before using your hole borer always visually inspect it to see if any parts are worn or damaged.
Replace damaged parts before using the machine.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxxtools 20570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxxtools 20570 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info