629542

Maxview MXL002 OMNISAT DOME Manual

19
Zoom out
Zoom in
Previous page
1/22
Next page
26 19
AUTOMATIC SEARCH
> When in the “Main Menu”, go to “Installation” by
using “ ”/“ ” and “✘”/“✘” buttons and press the
“OK” button. Press the “OK” button again to enter
the “Automatic Search” option. Select the “All Scan”
sub-menu.
> A satellite can be selected by highlighting “Satellite”
and using the “ ”/“ ” buttons.
> If “Method” is highlighted “Fixed Sr” or
“Transponder” can be selected. If you select
“Transponder” as “Method”, all relevant
transponders will be searched. If you want to search
by symbol rate, select “Fixed Sr” in “Method” and
then enter the “Symbol Rate” by using “ ”/“ ” or
number buttons.
> Select “Only TV”, “Only Radio” or “All” scan type in
“TV/Rad” by using “ ”/“ ” buttons.
> If you want to scan for Free-to-Air channels,
highlight “FTA/Scrambled” and select “FTA Only”. If
you want to scan for both Free-to-Air and other
channels, select “All”.
> “Network Search”: A network information table is
sent by some programs and it shows the location of
other programs. If “Network Search” option is “Yes”,
the receiver tries to find the new programs according
to the network information table.
✘
✘
✘
✘
✘
✘
✘
✘
> MOVE: Press the “GREEN” button to enter
“Operation” menu in the “Channel List”. Select by
using “ ”/“ ” buttons. “Move” operation is
activated. When you press the “OK” button the menu
on the right appears. The “Channel List” appears as
the left column and the channels to be moved as the
right column. Select the channel you want to move
and press the “OK” button. That channel goes to the
right column. In this menu press the “GREEN” button
to go to the list on the right. If you select a channel
and press the “OK” button again that channel goes
back to the left column, it can be removed from the
channel list to be moved. All the channels to be moved
are in the right column.
> Press the “YELLOW” button to move the selected
channels to their desired position. In the left column,
by using “✘”/“✘” buttons go to the place the chan-
nels are to be moved to and press the “OK” button. All
the channels that are moved will go to the top of that
selected channel position.
> SWAP: Press the “GREEN” button to enter
“Operation” menu in the “Channel List”. Select by
using “ ”/“ ” buttons, “Swap” operation is
activated. Highlight the first channel that you want
to swap and press “OK” button. Then highlight the
second channel that you want to swap, press the “OK”
button again. The two channels have now replaced
each other.
✘
✘
✘
✘
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info