629542

Maxview MXL002 OMNISAT DOME Manual

21
Zoom out
Zoom in
Previous page
1/22
Next page
24 21
> Select “Search” in “Transponder” menu to begin the
scanning process for your selected transponder. All
the TV and Radio channels for that transponder will be
found and displayed on the screen.
> When the Scanning is completed, a message “...
channel(s) are found. Do you want to save them?”
will appear on the screen. If you press the “OK”
button, all the channels that have been found will be
stored. If a channel already exists in the memory it will
not be saved. If you press “MENU” or “EXIT” button,
no channels will be stored.
CHANGING PROGRAM SETTINGS
> Display the program to which you want to change
the settings.
> Enter the “Installation” menu from the “Main
Menu” and then “Manual Edit / Search” sub-menu.
> By using “ ”/“ ” buttons you can change
“Satellite”, “Frequency”, “Polarity” and “Symbol Rate”
information. When you enter correct information,
the Signal Quality and the Signal Strength levels will
appear in the bars at the bottom of the menu. By
pressing the “RED” button in this menu you can scan
a transponder at a particular frequency. If you press
the “BLUE” button, that channel will be added to the
end of the list as another channel.
> Scan TP: When you press the “RED” button, the
frequency that you have chosen will be scanned.
✘
✘
RADIO
Pressing the “RADIO” button activates the “Only
Radio” mode. By using “✘”/“✘” and number buttons
you can select a radio channel. You can deselect the
radio mode by pressing the “RADIO” button again.
If you press the “RADIO” button again, “All” mode is
selected, and if you press the “RADIO” button again
“Only TV” mode is selected.
FAVOURITE CHANNEL LIST
> Press the “FAV” button, while there is no menu on
the screen. The “Favourite Selection” menu appears
on the screen. You can select your favourite group in
this menu and only select the channels that appear in
the selected group. If you want to see all the channels,
select the “All Channels” option.
> Press “MENU” or “EXIT” button to exit without
selecting any option.
SATELLITE SELECTION
> If you want to watch the programs of a particular
satellite, you can select that satellite from a list.
> Press the “SAT” button when there is no menu on
the screen. The “Satellite Selection” menu appears.
Highlight the satellite that you want by using “✘”/“✘”
buttons and pressing the “OK” button.
> You will see only the programs for the satellite that
you have chosen from the program list. If the option
“All Sats” is selected, you will be able to watch the
programs included for all the satellites.
> Press “MENU” or “EXIT” button to exit from the
satellite list.
… 21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info