629542

Maxview MXL002 OMNISAT DOME Manual

18
Zoom out
Zoom in
Previous page
1/22
Next page
18 27
SYSTEM
> The second sub-menu in “Main Menu” is “System”
menu. When in the “Main Menu”, highlight “System”
using “ ”/“ ” and “✘”/“✘” buttons and press the
“OK” button. “System” sub-menu is displayed.
> There are “OSD Settings”, “Time and Date”,
“Parental Settings”, “Other Settings” and “Service”
options in this menu.
OSD SETTINGS
> When in the “Main Menu”, highlight “System”
by using “ ”/“ ” and “✘”/“✘” buttons and press
the “OK” button. Select “OSD Settings” and press
the “OK” button again. “OSD Settings” sub-menu is
accessed.
> Highlight “OSD Language” and select a language
using “ ”/“ ” buttons.
> “Prim. Audio Lang”, “Sec. Audio Lang”: Primary and
Secondary audio languages. Some channels broadcast
in multiple languages. The languages that are selected
using these options will be the chosen language for
the channel.
> “Subtitle Language”: Some channels broadcast in
multiple subtitle languages. If the channel that you
are watching has subtitle languages, it is displayed
automatically.
> If you highlight “Transparency” the transparency
can be adjusted to “0%”, “20%”, “40%” or “60%”.
> “Channel Switching” is, freezing the picture,
blanking the screen or fast. Select “Fast”, “Freeze” or
“Blank” by using “ ”/“ ” buttons.
> “Infobar Duration” can be set from 1 second to 5
seconds.
✘
✘
✘
✘
✘
✘
> “OSD Background” and “Radio Background”:
There is one standard OSD and radio background
(“Default”) in your receiver. You can load different
pictures from your PC to the receiver. They appear
in this
option and you can select the picture that you
want.
> Press “MENU” or “EXIT” button to exit from
“OSD Settings” sub-menu. A message “Do you
want to store?” will be displayed if you have
made any
changes. Press the “OK” button to store. Press
“MENU” or “EXIT” button to exit without storing
the changes.
✘
✘
After you have created a new “Favourite Group” you
can change the name of the group. To do this the
“Rename Group” option is used. To add a channel to
the created group, highlight “Add/Rem. Channel” and
press the “OK” button. The menu on the right appears
on the screen. The “Channel List” appears as the left
column and the favourite group list appears as the
right column. Select a channel from the “Channel List”
and press the “OK” button. That channel will now be
added to the “Favourite Channel” list.
LOCK: Press the “GREEN” button to enter the
“Operation” menu in the “Channel List”. Select by
using “ ”/“ ” buttons. “Lock” operation is activated
and by pressing the “OK” button the “PIN” menu
appears. Enter the 4 digit password by using the
number buttons on the remote control. (Factory
setting of your receiver is 0000). The “Lock” menu
is accessed. By using “✘”/“✘” buttons go to the
channel to be locked and press the “OK” button. That
channel will be locked and prefixed by the “ ” in the
“Channel List”.
The “Parental lock” operation can also be used on
channels by using this option. The “PIN” menu
appears when you want to access these channels and
the correct PIN must be used to gain access.
✘
✘
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info