Manual Maxview MXL002 OMNISAT DOME (page 17 of 22) (English)

629542

Zoom out

Zoom in

1/22

28 17

TV SETTINGS

> When in the “Main Menu”, select “System” by using

“ ”/“ ” and “✘”/“✘” buttons and press the “OK”

button. Highlight “TV Settings” and press the “OK”

button again. The “TV Settings” sub-menu is accessed.

> In “TV Settings” you can select the TV system as

“NTSC”, PAL B/G” or “PAL I” in the “System” option

using “ ”/“ ” buttons.

> You can set the Brightness, Contrast and Saturation

value between 0-100 by using “ ”/“ ” buttons.

> Press “MENU” or “EXIT” button to exit from the

“TV Settings” sub-menu. A message, “Do you want to

store?” will be displayed if you have made any

changes. Press the “OK” button to store. Press

“MENU” or “EXIT” button to exit without storing the

changes.

TIME AND DATE

> Enter the “Main Menu” and then the “Time & Date”

sub-menu from the “System” menu.

> “Mode” can be selected as “Auto”, “Manual” or

“Selected tp”. In “Manual” mode the time is set by the

user. In “Auto” mode the time is ﬁxed by channel. In

“Selected tp” mode the time is ﬁxed by the selected

transponder.

> You can highlight “Date” and “Time” by using

“✘”/“✘” buttons and change them by using the

number buttons.

> Press “MENU” or “EXIT” button to exit from the

menu. A message “Do you want to store?” will be

displayed if you have made any changes. Press the

“OK” button to store. Press “MENU” or “EXIT” button

to exit without storing the changes.

Note: If the equipment power fails for any reason, the

time and date will be lost if they were entered using

the manual mode. “Time Zone” should be entered to

ensure automatic time storage. It is mandatory to set

the time and date before adjusting the timers.



✘

CHANNEL LIST – OPERATION MENU

Different operations are also possible in the

“Channel List” menu. Press the “GREEN” button

to select operation type. After pressing the

“GREEN” button in the “Channel List”, highlight

“Operation” by using “ ”/“ ” buttons. There

are 8 symbols in the “Channel List” representing

these operations.

> NAME: The ﬁrst symbol at the top left of the

column in “Channel List” is used for changing

the channel name. Select by using “ ”/“ ”

buttons and press the “OK” button to access the

“Name” operation. You can select the channel

that you want to rename by using “✘”/“✘”

buttons. When you press the “OK” button

again, a keyboard appears on the screen.

Press“✘”/“✘”, “ ”/“ ” and the “OK” buttons

on the remote control to enter the desired letters

on the keyboard. The channel name may have

up to 32 characters. You can use uppercase or

lowercase, numbers, -, & and space in the

channel name.

> DELETE: You can delete channels you don’t

want in the “Channel List” by using the “Delete”

operation. Press the “GREEN” button to enter

“Operation” menu. Select by using “ ”/“ ”

buttons and press the “OK” button to activate

“Delete” operation. When you press the “OK”

button, the current channel is selected. You

can highlight the channel you want to delete by

“✘”/“✘” buttons. If you press the “OK” button

again the highlighted channel is deleted

immediately. All channels belonging to that

list will be deleted if the “YELLOW” button is

pressed.

> FAV GROUP: Press the “GREEN” button to

enter “Operation” menu. Select by using

“ ”/“ ” buttons, “Fav Group” is activated

and by pressing the “OK” button the “Fav Ops.”

menu appears. The options in this menu are,

adding/removing a new channel to/from the

favourite channel group, creating a new favourite

channel group, renaming and deleting an

existing group, locking and unlocking a group.

To add a new group, press the “OK” button while

“Add/Rem. Channel” is selected. A keyboard

appears on the screen. You can now create a new

favourite group using the keyboard.



✘



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Maxview MXL002 OMNISAT DOME Manual

Product: