Manual Max 32891 (page 61 of 161) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

789308

Zoom out

Zoom in

1/161

Press the spindle lock (28) by the handle, turn

the saw blade until it locks.

Hold the spindle lock (28) in and loosen

the lock screw on the blade by turning it

clockwise using the spanner provided.

Remove the lock screw and outer ange and

carefully lift the saw blade o the spindle.

Wear gloves so that you do not cut yourself

on the blade.

Do not dispose of used chains in your

domestic refuse. Dispose of them correctly in

accordance with local legislation.

Clean any lings and sawdust from the

spindle and anges. Lubricate the spindle,

anges and lock screw with a few drops of oil

or a spray lubricant.

Fit the new saw blade and the other parts

in reverse order. Check that the direction

indicated on the saw blade matches the

direction of rotation of the motor. Turn the

saw blade manually to check that it does not

catch against any of the other parts, even

when set for bevelling.

Calibration

Calibrating the bevel angle

The saw arm must be locked securely in its

lowest position.

Loosen the lock knob for the mitre angle (10).

Push the release knob (11) up, and turn the

arm (9) until the indicator lines up with 0°

on the scale for the mitre angle. Release the

release knob (11) and retighten the lock

knob (10).

Loosen the lock knob for the bevel angle

(16). Adjust the saw arm to a bevel angle of

0° so the saw blade is perpendicular to the

saw bench. Tighten the lock knob for the

bevel angle.

Place a try square against the saw bench and

saw blade. The set square must lie against

the surface of the saw blade, not against the

teeth.

Turn the saw blade and check in several

places that it is perpendicular to the saw

bench.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Max 32891 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Max 32891 Manual

Product: