789308
62
Zoom out
Zoom in
Previous page
1/161
Next page
62
If the blade is not perpendicular to the saw
bench, adjust the saw arm as follows:
Loosen the lock knob for the bevel angle
(16).
Loosen the lock screw (A) using the spanner
provided. Loosen the counter-nut (B) and
turn the adjustment screw (C) until the saw
blade is perpendicular to the saw table.
Retighten the counter-nut.
Loosen the screw holding the arrow on the
scale for bevel angle (24) and adjust the
arrow so it points to 0°. Retighten the screw.
If you have an angle of 45 degrees, you can
adjust the 45° bevel angle on the other
adjustment screw (D) and counter-nut (E) in
the same way.
Calibrating the mitre angle
The saw arm must be locked securely in its
lowest position.
Loosen the lock knob for the mitre angle (10).
Push the release knob (11) up, and turn the
arm (9) until the indicator lines up with 0°
on the scale for the mitre angle. Release the
release knob (11) and retighten the lock
knob (10).
Loosen the lock knob for the bevel angle
(16). Adjust the saw arm to a bevel angle of
0° so the saw blade is perpendicular to the
saw bench. Tighten the lock knob for the
bevel angle.
Loosen the screws 2 (F) holding the guide (6)
on one side securely to the base.
Place a try square between the blade
and the guide, and turn the guide until is
perpendicular to the saw blade.
Retighten the screws (F).
Adjust the guide on the other side in the
same way.
Loosen the screw holding the arrow (G) on
the scale for mitre angle and adjust the arrow
so it points to 0°.
Retighten the screw.
br
A
B
C
D
E
FF
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Max 32891 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Max 32891 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info