Manual Max 32891 (page 59 of 161) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

789308

Zoom out

Zoom in

1/161

Locking the saw arm

The lock pin (32) secures the saw arm so that

it cannot move during transport or storage.

Press the saw arm down, and turn and pull

the lock pin out before use so that the saw

arm can be moved.

You can lock the saw arm in the low position

by pushing the lock pin in until it engages.

The saw must not be used if the lock pin is

securing the saw arm in a xed position.

The mitre saw may only be lifted by the

carrying handle (27) during transport. The

saw arm must be locked during transport.

Preparation

Attach the mitre saw securely to a work

bench or workstation by fastening it securely

using bolts and nuts through the mounting

holes in the feet (13) of the saw.

Push the pull-out rails (7) into the holes on

either side of the mitre saw and secure them

in the required position using the lock knobs

(15).

Insert the screw clamp’s (18) stanchion into

one of the sockets on the saw and secure

it using the wing nut. Tighten the clamp

at the required height using the lock knob

(17) on the side of the clamp and secure the

workpiece by tightening the knob at the top

of the clamp (23).

For bevel cutting, the clamp must always be

mounted on the right side of the saw arm.

Note that in some cases the clamp may block

the saw arm movement. If this happens, use

a dierent clamp to secure the workpiece.

Fit the dust bag (20) or connect a vacuum

cleaner or dust extraction device to the dust

extraction connector (21) on the mitre saw.

Loosen the lock knobs (31), and adjust

the adjustable guides as required. This is

especially important when bevel cutting at

45 degrees.

For vertical cuts the adjustable guides must

always be a maximum of 8 mm from the saw

blade.

For bevel cutting, the adjustable guides must

be a minimum of 8 mm from the saw blade.

Retighten the lock knobs (31).

Without starting the saw, check that the saw

blade cannot come into contact with the

adjustable guides during sawing.

The saw is now ready for use.

Settings

Setting the bevel angle

Loosen the lock knob (16) for the bevel angle

and tilt the saw arm to the left, until the

indicator is level with the required setting on

the scale (24) for the bevel angle. Retighten

the lock knob.

Setting the mitre angle

Loosen the lock knob (10) for the mitre angle.

Push the release knob (11) up, and turn the

arm (9) to the right or left, until the indicator

is level with the required number on the

scale for the mitre angle. Release the release

knob (11) and retighten the lock knob (10).

Adjust the guide (31) when the saw will be

used for mitre cuts.

The mitre saw is equipped with a series of

quick stops (12), so it is easy to adjust the saw

bench to the most common angles.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Max 32891 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Max 32891 Manual

Product: