786811

Mastervolt Mass Systemswitch 16 kW Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
6
Mass Systemswitch 16 kW (230V) – User and Installation Manual
3.3.1 Inverter only output (no break)
The Inverter only output is directly powered by the inverter.
This means that this output will never be transferred to one
of the other AC sources. Critical loads, like a computer or
navigations equipment which are sensitive for voltage
drops, should be connected to this output.
3.3.2 Short break output
The Short break output is transferred between the
generator input, shore input and inverter input, depending
on the availability. In principle, AC-power is always
available on this output.
CAUTION!
During transfer between the AC inputs, users
are not supplied with power for a short time.
Because of this, computers etc. connected to
this output might lose data.
Due to the source priority, this output is supplied by shore
power if available. And also, if generator power is
available, this output will be supplied by the generator
input. This means that the generator input has a higher
priority than shore input and the shore input has a higher
priority than inverter input. This preferent behaviour is not
always wanted. For instance if the external shore power
breaker is only 4A, it is not possible to power the whole
electrical system at the same time. It is however possible
to override this preference manually by means of the load
on inverter mode. See section 3.5 for additional
information.
3.3.3 Power output
Depending on its availability, the power output is powered
by the generator input or the shore input. The generator is
the highest in priority and therefore overrules the shore
power. Medium power loads like the battery charger must
be connected to this output.
3.3.4 Generator only output
Finally the generator only output is powered by the
generator only. Larger loads like a water maker or an
electric cooking appliance should be connected to this
output.
Figure 2: Indicator lights on front of the Mass Systemswitch
3.4 MONITORING AND CONTROL
The LED indicators on the front of the cabinet indicate the
status your AC installation. The meaning of the LEDs is
explained in figure 2.
3.4.1 Remote control panel (optional)
For remote operation Mastervolt offers a wide range of
intelligent remote control panels that can be connected to
the Mass Systemswitch, giving you a status overview of
the available AC-power sources. Besides when a remote
control panel is applied, a very useful feature of the Mass
Systemswitch can be used: the load on inverter mode.
Incoming AC power is available on
the generator input.
Incoming shore power is available
on the Shore input.
Incoming AC power from the inverter
is available on the Inverter input.
Load on inverter illuminates if the
load on inverter mode is activated.
See section 3.5.
AC power is available on the
Generator only output
AC power is available on the Power
output
AC power is available on the
Shortbreak output
AC power is available on the
Inverter output
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Systemswitch 16 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Systemswitch 16 kW in the language / languages: English as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info