786811

Mastervolt Mass Systemswitch 16 kW Manual

19
Zoom out
Zoom in
Previous page
1/20
Next page
19
6.3.4 List of event sources
Below the list of event sources of the Mass Systemswitch is shown. These event sources can be used to initiate an event
command at another device that is connected to the MasterBus.
Event source
Description
Gen pre overload
Actual power at the Generator input is more than 80% of the Generator power setting (see section
6.3.3). This event is cancelled again when the power at the Generator input is less than 75% of the
Generator power setting.
Gen. overload
Actual power at the Generator input is more than the Generator power setting (see section 6.3.3).
This event is cancelled again when the power at the Generator input is less than 95% of the
Generator power setting
Generator OK
AC power is available on the generator input and within specifications
Shore pre overld
Actual power at the Shore input is more than 80% of the Shore fuse setting (see section 6.3.1). This
event is cancelled again when the power at the Shore input is less than 75% of the Shore fuse
setting.
Shore Overload
Power at the Shore input is more than the Shore fuse setting (see section 6.3.1). This event is
cancelled again when the power at the Shore input is less than 95% of the Shore fuse setting
Shore OK
AC power is available on the Shore input and within specifications
Pwr pre overload
Actual power connected to the Power output is more than 80% of the maximum allowed output
current (see section 6.3.1, “Pwr src limit”)
This event is cancelled when the actual power is less than 75% again.
Power overload
Actual power connected to the Power output is more than the maximum allowed output current (see
section 6.3.1, “Pwr src limit”)
This event is cancelled when the actual power is less than 95% again.
Power OK
AC power is available on the Power output and within specifications
6.3.5 List of event commands
With this version of the Mass Systemswitch programming of event commands at the Mass Systemswitch is not possible.
6.3.6 Personal settings and notes
Use the table below to fill in your personal settings and notes.
Value
Default
Personal setting
Load on Inv
Auto
Device name
Systemswitch
Gen. U low on
205V
Gen. U low off
150V
Gen. F low on
48Hz
Gen. F low off
43Hz
Ignore gen freq.
Off
Generator Power
16kVA
Shore name
Shore
Generator name
Generator
LOI gen load
100%
LOI gen delay
5s
LOI generator
Off
LOI shore load
100%
LOI shore
Off
LOI runtime
120min
… 19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Mass Systemswitch 16 kW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Mass Systemswitch 16 kW in the language / languages: English as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info