Manual Makita DCU180 (page 21 of 116) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690917

Zoom out

Zoom in

1/116

21 ENGLISH

Periodic checks

• Checkthattheboltsandnutsaretightenedrmly.

►Fig.49

• Checkthatthecarrierislockedwhenthelock

lever is fully pulled down.

►Fig.50: 1. Carrier lock 2. Lock lever

• Checkthatthebrakeleverworksproperly.

►Fig.51: 1. Brake lever

WARNING: If the brake lever reaches the han-

dle when you fully pull the lever, the brake is not

working properly. Adjust the brake, or ask your

local Makita Service Center for repairs.

• Checktoseeifthefrontwheelisnotdamagedor

at.

Cleaning the machine

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

NOTICE: Pour the water below the carrier or

bucket when cleaning the machine with running

water. Do not use the high pressure washer for

cleaning.

Remove mud, dirt, and the like from the machine. Clean

the machine with running water. After the cleaning, wipe

the machine with a dry cloth.

Storage

Remove the lock key. Store the machine in a safe place

out of the reach of children.

When storing the machine, the handles can be turned

toward the front. Remove the short hexagonal bolts

and shoulder bolts using the wrench included in the

package. Turn the handles toward the outside, and then

rotate the handles to the front. Tighten the shoulder

boltsandshorthexagonalboltstoxthehandles.

►Fig.52: 1. Shoulder bolt 2. Short hexagonal bolt

NOTICE: Do not tighten the short hexagonal

bolts with excessive force. Tighten them with

properforcesothatthehandlesarestablyxed.

NOTICE: Do not pinch the cords with the bolts.

Adjusting the brake

CAUTION: If the rear wheels are installed, be

sure to lock the rear wheel brake before adjusting

the brake.

1. Remove the carrier or bucket, and then open the

carrier frame.

►Fig.53: 1. Carrier frame

2. Pull the brake lever to release the lock button of

the brake lever.

►Fig.54: 1. Lock button 2. Brake lever

3. Loosentheadjustingsleeveandxingnut.

►Fig.55: 1.Adjustingsleeve2. Fixing nut

4. Tightenthexingnutonly.

►Fig.56: 1. Fixing nut

5. Loosentheadjustingsleeveandxingnut.

►Fig.57: 1.Adjustingsleeve2. Fixing nut

6. Tightenthexingnutonly.

►Fig.58: 1. Fixing nut

7. Make sure that the brake lever is in the halfway

position when it is fully pulled. If the brake lever is in the

halfway position, go to step 13. If the brake lever is not

in the halfway position, go to step 8.

►Fig.59: 1. Brake lever

8. Loosenthexingnutonly.

►Fig.60: 1. Fixing nut

9. Tightenthexingnutandadjustingsleeve

together.

►Fig.61: 1.Adjustingsleeve2. Fixing nut

10. Loosenthexingnutonly.

►Fig.62: 1. Fixing nut

11. Tightenthexingnutandadjustingsleeve

together.

►Fig.63: 1.Adjustingsleeve2. Fixing nut

12. Make sure that the brake lever is in the halfway

position when it is fully pulled.

►Fig.64: 1. Brake lever

13. Fold the carrier frame, and then attach the carrier

or bucket.

►Fig.65: 1. Carrier frame

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual. The use of any other

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Carrier

• Bucket

• Makitagenuinebatteryandcharger

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

differ from country to country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCU180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCU180 Manual

Product: