690917
20
Zoom out
Zoom in
Previous page
1/116
Next page
20 ENGLISH
Adjusting the width of the carrier
Loosen the 6 thumb nuts, and then slide the front and
siderails.Tightenthethumbnutstoxthefrontand
side rails.
►Fig.39: 1. Thumb nut 2. Rail
CAUTION: Do not slide the rails beyond the
limit mark.
►Fig.40
OPERATION
Operating the machine
NOTICE: The front wheel is driven by battery
power in this machine. Use this machine to assist
with carrying operations.
NOTICE: Be sure to insert the lock key in the bat-
tery box before the operation. If the lock key is not
inserted, a short beep sound is emitted when you pull
the switch trigger. The beep sound stops by releasing
the switch trigger and pulling the brake lever.
1. Select the battery cartridge with the battery selec-
tion switch.
2. Press the power button on the control panel for a
few seconds to turn the power on.
►Fig.41: 1. Power button
3. Pull the brake lever to release the lock of the
brake lever.
►Fig.42: 1. Lock button 2. Brake lever
NOTE: Release the rear wheel brake if the rear
wheels are installed.
4. Holdthehandlesrmlywithbothhands.
►Fig.43
5. Pull the switch trigger.
►Fig.44: 1. Switch trigger
Loading objects
CAUTION: Before loading objects on the
machine, make sure that the power is off and the
brake lever is locked.
CAUTION: If the rear wheels are installed,
make sure that the rear wheel brake is locked
before loading objects on the machine.
CAUTION: Before loading objects on the
machine, make sure that the carrier or bucket is
locked.
CAUTION: Be sure to load objects within the
carrier or bucket.Ifobjectsarestickingoutofthe
carrier or bucket, they may fall or collapse if they
touch obstacles.
►Fig.45
CAUTION: Be sure to load objects so that
they are below eye level. If the load is too high, it is
dangerous because the view is obscured. Also, there
isariskofoverturningandinjurybecausetheloadis
likely to be unbalanced.
►Fig.46
Whenloadingobjectsonthecarrier,securetheobjects
with ropes and tie them down to the rope hooks.
►Fig.47
Dumping objects
CAUTION: Lift the carrier or bucket on at
and stable ground. Operation on unstable ground
mycauseanaccidentorinjury.
Youcandumptheobjectsbyliftingandtiltingthecarrier
or bucket.
1. Stop the machine, and then lock the brakes.
NOTICE: It is recommended to block the front
wheel to stabilize the machine.
2. Release the lock lever.
3. Stand at the side of the machine, hold the handle
with one hand, and then lift and tilt the carrier or bucket
by pushing up the carrier frame with the other hand.
►Fig.48
CAUTION: Hold the handle and carrier frame
rmly, and work in a stable posture.
CAUTION: Keep the load to a minimum. If the
load is large, do not try to lift the carrier. Reduce
the load, and then lift the carrier.
CAUTION: After dumping the objects, be sure
to lock the carrier or bucket.
MAINTENANCE
CAUTION: Always be sure to park the
machine on at ground and lock the brake lever
before storage or attempting to perform inspec-
tions or maintenance.
CAUTION: If the rear wheels are installed,
make sure that the rear wheel brake is locked
before storage, inspections, or maintenance.
CAUTION: Always be sure that the lock
key and battery cartridge are removed from
the machine before storage, inspections, or
maintenance.
CAUTION: Always remove the lock key when
the machine is not in use. Store the lock key in a
safe place out of reach of children.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DCU180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCU180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info