Manual Makita DCU180 (page 17 of 116) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690917

Zoom out

Zoom in

1/116

17 ENGLISH

NOTICE: Do not tighten the short hexagonal

bolts with excessive force. Tighten them with

properforcesothatthehandlesarestablyxed.

NOTICE: Do not pinch the cords with the bolts.

10. Fix the cords with the clamps.

►Fig.14: 1. Clamp

11. Fold the carrier frame.

►Fig.15: 1. Carrier frame

12. Press the lock button while pulling the brake lever

to lock the brake.

►Fig.16: 1. Lock button 2. Brake lever

CAUTION: If the rear wheels are installed,

press the brake pedal for the rear wheel to lock

the rear wheel.

13. Hook the carrier lock, and then pull down the lock

lever to lock the carrier.

►Fig.17: 1. Carrier lock 2. Lock lever

NOTICE: Make sure that the lock lever is locked

securely.

NOTICE: Do not pinch the cords with the lock

lever.

NOTE: If you attach the support legs instead of the

rear wheels, remove the rear wheels from the frames,

and then attach the support legs to the frames.

►Fig.18: 1. Rear wheel 2. Support leg

Assembling and installing carrier

Optional accessory

1. Take out the carrier from the box, attach the front

and side rails to the base frame, and then tighten the

thumbnutstoxtherails.

►Fig.19: 1. Thumb nut

2. Place the carrier on the base unit, and then insert

the hexagonal bolts and washers into the frames from

the top. Tighten the washers and spring washers and

butterynutsfromthebottomtoxthecarrier.

►Fig.20: 1. Long hexagonal bolt 2. Short hexagonal

bolt 3. Washer 4. Spring washer 5.Buttery

nut

NOTICE: Use the long bolts for the front, and the

short bolts for the rear.

Installing bucket

Optional accessory

Place the bucket on the base unit, insert the hexagonal

bolts into the frames, and then tighten the washers and

springwashersandbutterynutsfromthebottomtox

the bucket.

►Fig.21: 1. Hexagonal bolt 2. Washer 3. Spring

washer 4.Butterynut

FUNCTIONAL

DESCRIPTION

Installing or removing battery

cartridge

CAUTION: Always switch off the machine

before installing or removing of the battery

cartridge.

CAUTION: Make sure that you lock the battery

cover before use. Otherwise, mud, dirt, or water may

cause damage to the product or the battery cartridge.

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

it may accidentally fall out of the machine, causing

injurytoyouorsomeonearoundyou.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

not being inserted correctly.

CAUTION: Do not use the high-temperature

battery cartridge. When the high-temperature bat-

tery cartridge is used, the machine stops automati-

cally before a short beep sound is emitted, and may

causeaninjury.

Installing the battery cartridge

1. Rotate the lock lever, and then open the cover of

the battery box.

►Fig.22: 1. Lock lever 2. Cover

2. Align the tongue on the battery cartridge with the

slot on the battery box, and then slide the cartridge until

it locks in place with a little click. If you can see the red

indicator on the upper side of the button, battery car-

tridge is not locked completely.

►Fig.23: 1. Battery cartridge

3. Insertthelockkeyintheplaceshowninthegure

as far as it will go.

►Fig.24: 1. Lock key

NOTE: If the lock key is not inserted completely, the

machine does not work.

4. Close the cover of the battery box, and then rotate

the lock lever.

►Fig.25: 1. Lock lever 2. Cover

Removing the battery cartridge

1. Rotate the lock lever, and then open the cover of

the battery box.

2. Pull out the battery cartridge from the battery box

while sliding the button on the front of the cartridge.

►Fig.26: 1. Button

3. Pull out the lock key.

4. Close the cover of the battery box, and then rotate

the lock lever.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCU180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCU180 Manual

Product: