Manual Makita DCU180 (page 15 of 116) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690917

Zoom out

Zoom in

1/116

15 ENGLISH

8. Do not operate the machine on upward slopes

greater than 12°.

9. If you nd an abnormality, stop the machine

on at ground. Before inspecting the machine,

pull the brake lever and lock the brake, and

then turn the power off.

10.

Before operating the machine, make sure that

the lock lever is fully pulled down and com-

pletely locked. If the lock is incomplete, there is a

riskofaccidentorinjuryasthecarrierorbucketmay

betiltedandtheobjectsfallwhengoingdownhill.

11. Be careful not to entangle the cords with the

load or obstacles.

Operation on slopes

1. Do not cross on slopes.

Be sure to decrease speed and exercise caution.

3. Exercise caution when starting or stopping the

machine on slopes.

4. As the loads become less stable on slopes,

rmly secure the loads with ropes.

As the machine becomes unstable depending on the

condition of the road, keep the load to a minimum.

6. As the view is obscured on slopes, keep the

height of the load to a minimum.

7. Never park the machine on steep slopes. Park

the machine on at ground, pull the brake

lever and lock the brake, and then turn the

power off.

8. Do not change the direction or speed mode on

steep slopes.

9. Do not release the switch trigger on upward

slopes. The machine may go in reverse and

cause an accident.

10.

Make sure that the remaining battery capacity

is enough before operating on slopes. If the

remaining battery capacity is not enough, charge

the battery or replace it with a charged one.

Loading objects

1. Do not overload objects. When loading

objects, be sure to follow the instructions and

load limits in the manual.

2. Firmly secure the objects with ropes.

3. Load the objects within the carrier or bucket.

Iftheobjectsprotrudefromthecarrierorbucket,

thereisariskofaccidentsduetotheobjects

falling or contact obstacles such as walls.

4. Be sure that loaded objects are below eye

level. If the load is too high, it is dangerous

because the view is obscured. Also, there is a risk

ofoverturningandinjurybecausetheloadislikely

to be unbalanced.

5. Load the objects on the carrier or bucket

evenly.Iftheobjectsareloadedunevenly,thereis

ariskofoverturningandinjurybecausetheloadis

likely to be unbalanced.

6. Before loading the objects or operating the

machine, make sure that the lock lever is fully

pulled down and completely locked.

7. Be sure to load heavy objects rst to keep

balance.

8. Do not extend the front and side rails on steep

slopes. Extend the side rails when lightweight

objects are loaded.

When extending the front and side rails, do not

extend them over the extension limit. Be sure to

extend the side rails so that the right and left sides

are the same length, and load objects evenly.

10. Load and unload objects on at ground.

11. When lifting and tilting the carrier or bucket,

hold the handles and frame rmly, and work in

a stable posture.

Maintenance

1. Always be sure to park the machine on at

ground and lock the brake lever before stor-

age or attempting to perform inspections or

maintenance.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current ow,

overheating, possible burns and even a breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10.

The contained lithium-ion batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCU180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCU180 Manual

Product: