690917

Makita DCU180 Manual

16
Zoom out
Zoom in
Previous page
1/116
Next page
16 ENGLISH
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causingres,personalinjuryanddamage.Itwill
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
Parts description (when the carrier
is installed)
►Fig.1
1 Control panel 2 Handle
3 Switch trigger 4 Battery box
5 Brake lever for front
wheel
6 Rear wheel
7 Brake pedal for rear
wheel
8 Lamp
9 Front wheel 10 Carrier
Parts description (when the bucket
is installed)
►Fig.2
1 Control panel 2 Handle
3 Switch trigger 4 Battery box
5 Brake lever for front
wheel
6 Rear wheel
7 Brake pedal for rear
wheel
8 Lamp
9 Front wheel 10 Bucket
ASSEMBLY
CAUTION: Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Assembling main unit
1. Take out the base unit and handles from the box.
►Fig.3
NOTICE: Be sure to take out the base unit and
handles together, so that excessive force is not
applied to the cords.
2. Place the packing material under the rear side of
the base unit.
►Fig.4: 1. Packing material
3. Insert the rear wheels into the frame.
►Fig.5: 1. Rear wheel
►Fig.6: 1. Rear wheel
NOTE: The support legs can be attached instead of
the rear wheels.
4. Attach the spring washer and the washer to the
short hexagonal bolt, and then tighten them using the
wrench included in the package.
►Fig.7: 1. Short hexagonal bolt 2. Spring washer
3. Washer
►Fig.8
NOTICE: Be sure to use the short hexagonal
bolts to tighten the rear wheels.
NOTICE: Fix the rear wheels at the same position
on both sides.
5. Raise the handles, and then insert them into the
base unit.
►Fig.9
NOTICE: Do not allow the cords inside area "A"
in the gure.Longobjectsmaybeentangledwiththe
cords and cause accidents.
NOTICE: Do not apply excessive force to the
cords when raising and inserting the handles.
NOTICE: Be sure to raise the handles with both
hands.
6. Open the carrier frame toward the front.
►Fig.10: 1. Carrier frame
7. Unfold the handles, then insert the long hexagonal
bolts into the base unit, and then tighten the nuts with
the wrench included in the package.
►Fig.11: 1. Long hexagonal bolt
8. Tighten the shoulder bolts from the rear using the
wrench included in the package.
►Fig.12: 1. Shoulder bolt
9. Tighten the short hexagonal bolts from both sides
usingthewrenchincludedinthepackagetoxthe
handles.
►Fig.13: 1. Short hexagonal bolt
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DCU180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCU180 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info