598435
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
REPAIR AND MAINTENANCE WORK
CAUTION: Before doing any work on the brushcutter, always
switch off the motor and pull the plug cap off the spark
plug . Always wear protective gloves!
CAUTION: Start the brushcutter only after complete assembly
and inspection!
General The brushcutter Clean exterior, check for damage. In case of damage,
as a whole have repaired by a quali ed service centre immediately
Before each start Cutting tool Check for any signs of damage, that the tool is sharp
and that it is rmly secured.
Guards Check for correct position, rm attachment and
good condition. 10
Screws and nuts Check their condition and that they are rmly secured.
I/O-switch, 16
Safety locking button,
Throttle lever Functional check 16
Fuel tank cap and
fuel system Check for tightness
Idling speed Check, the cutting tool must not turn when the engine is idling. 16
Every time after the Air lter Clean 18
brushcutter is
switched off Cooling slit Clean, check for any signs of damage.
Every 6 months Spark plug Check and replace if necessary 18
Suction head Have checked by a quali ed workshop 18
Fuel tank Clean
Starter cable Check for any signs of damage.
Annually The brushcutter
as a whole Check at an authorized service centre
lf the brushcutter is The brushcutter Have a maintenance check carried out at a MAKITA
not to be used for a as a whole service centre. Store safely in a dry room.
long period of time
Fuel tank Empty and clean
Carburetor Run empty
Metal cutting tools Clean and lubricate lightly
Use the tool protection
Page
Note: The cutting tools below should be sharpened only
at a quali ed workshop! Manual resharpening will result
in an imbalance of the cutting tool, causing vibrations and
engine damage.
4-tooth star blade
Expert sharpening can be obtained from a MAKITA service
station.
Note: To prolong its useful lifetime, the 4-tooth star blade can
be turned once until both cutting sides are blunt.
Instructions for maintenance
For long life and trouble-free operation of your brushcutter the maintenance work listed below must be carried out regularly. Failure
to perform this maintenance work in a correct and timely fashion will void the guarantee. Failure to perform the prescribed mainte-
nance work can lead to accidents!
Do not do any maintenance or servicing work not described in this Instruction Manual. All such work may be done only by a MAKITA
service station.
After refuelling the brushcutter 50 times, it should be given a thorough maintenance check and a complete inspection at a MAKITA
service centre.
Sharpening of cutting tools
I
4-tooth star blade
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCM3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCM3310 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info