586987

Lynx ONE Manual

21
Zoom out
Zoom in
Previous page
1/36
Next page
Page 21
insert
J2
LynxONE
Master
J2
LynxONE
Slave 1
J2
LynxONE
Slave 2
J1
J1
J1
Internal Clock Cable
Configuring Multiple LynxONE’s
4. Listen to the playback of any wave file and note which LynxONE card is generating
the audio signal. In this case, the card generating audio is adapter 1.
5. Repeat steps 3 and 4, for “LynxONE 2 Analog Output”, “LynxONE 3 Analog
Output”, and so on until all LynxONE’s in your system have been identified.
The next step is to choose which LynxONE will act as a master. This choice is based on
preference only, but for ease of connection it makes sense to choose a LynxONE that is
on one end of the PCI slot array on your motherboard.
Cable Connections
Starting with the master LynxONE, insert the plug on one end of a Lynx Internal Clock
Cable into the CLOCK OUT header, labeled J1, until it clicks and locks into place.
This header is polarized to ensure the correct orientation of the cable plug. Insert the
plug on the free end of the cable into the CLOCK IN header, labeled J2, on the nearest
slave LynxONE. Connect each slave in a similar manner. Refer to the figure below.
Alternatively, if clock connections are made externally using the CLOCK IN and
CLOCK OUT connectors on the MIDI/Clock Cable, use BNC cables to make
connections between cards in the same sequence as described above.
Mixer Settings
With the clock connections in place, the sample clock settings of each LynxONE must
be adjusted using the LynxONE Mixer.
For the master LynxONE:
1. Select the master LynxONE from the Mixer pull-down menu.
2. Select a desired Sample Clock Source.
3. Select a desired Sample Clock Reference.
For each slave LynxONE:
1. Select the slave LynxONE from the Mixer pull-down menu.
2. Set the Sample Clock Source to Header if internal clock connections are used or
External if external clock connections are used.
3. Set the Sample Clock Reference to Word.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info