586987

Lynx ONE Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
Page 19
Working with Third Party Applications
In order to generate an audio file with the correct sample rate stored in its header, the
sample rate specified for the recorded file must match the sample rate of the equipment
driving the digital input. Failure to do so will cause subsequent playback of the recorded
file at the wrong sample rate.
If the Auto Selection box is checked in the LynxONE mixer, the source of the sample
clock generator will be restored to its previous setting at the completion of recording
or when the Monitor Source is changed to Analog In.
If the Auto Selection box is not checked, then the Sample Clock Source must be manually
changed before analog input recording or monitoring.
Simultaneous Device and Four-track Operation
The four audio devices of the LynxONE operate completely independent in terms of
whether they are in recording or playback modes and their associated audio files. This
implies that the devices can operate simultaneously and support the so-called “full-
duplex” mode where, for instance, the LynxONE Analog In device is recording while
the LynxONE Analog Out device is playing.
Although the devices act independently, when multiple devices are being used to record
or play multiple audio files simultaneously, the LynxONE driver has the capability to
synchronously start all devices with sample accuracy. This is especially important for
maintaining synchronization during playback of multiple devices and overdubbing.
By using both the analog and digital inputs and outputs, four track recording and
playback is possible. On the input side, the left and right signals associated with the
LynxONE Analog In device act as input channels 1 and 2, while the left and right
signals associated with the LynxONE Digital In device act as input channels 3 and 4.
The outputs are used in a similar manner. Again, control of this four-channel operation
is simply a matter of device selection in any compatible multitrack audio application.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info