Manual Lynx ONE (page 20 of 36) (English)

586987

Zoom out

Zoom in

1/36

Page 20

Configuring Multiple LynxONE’s

Up to four LynxONE cards can be installed in a computer for additional audio and

MIDI channels. If required, all LynxONE’s in a computer can be configured to maintain

sample accurate synchronization during digital audio recording and playback.

Cards are synchronized in a master-slave arrangement. One card is selected as the

master which provides the word clock source for the other slave cards in the system.

From the master, the word clock signal is daisy-chained from one slave to the next.

Word clock signals can be connected internally using the Internal Clock Cable, which

is available from Lynx. The CLOCK OUT header of one card is connected to the

CLOCK IN header of the next card. A separate cable is required for each slave card in

the system.

Alternatively, the CLOCK IN and CLOCK OUT connectors on the MIDI/Clock cable

can be connected externally with a standard 75 ohm BNC cable.

Adapter ID’s in a Multiple Card System

When multiple LynxONE cards are installed in a computer they are automatically

assigned unique adapter ID numbers. These adapter ID’s provide a means to identify

and communicate with each LynxONE when using the LynxONE Mixer application

and to select audio devices in third party applications.

In the LynxONE Mixer, the adapter that a user wishes to control is selected from the

Mixer pull-down menu. In a system with four LynxONE’s the adapters will be listed as

follows:

LynxONE 1 Mixer

LynxONE 2 Mixer

LynxONE 3 Mixer

LynxONE 4 Mixer

In each case, the adapter ID is the numeric character in each selection.

Most third party applications provide a setup or configuration menu for selecting a

desired wave audio device for recording and playback. With multiple LynxONE’s in a

system, each device name will contain the adapter ID. For example, the analog output

device on adapter 2 would be listed as “LynxONE 2 Analog Output”.

Selection of Master and Slave Clocks

In order to select master and slave LynxONE’s in a system, each adapter ID must be

first physically associated with a LynxONE installed in a computer slot. Since ID

assignment is automatic, determining this association is somewhat trial and error. The

procedure is as follows:

1. Connect at least one analog output channel of each LynxONE to an amplifier,

mixing console or other equipment that will provide audio monitoring.

2. Choose an audio application that allows selection of wave audio devices for audio

playback.

3. Select “LynxONE 1 Analog Output” as the playback device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lynx ONE Manual

Product: