586987
22
Zoom out
Zoom in
Previous page
1/36
Next page
Page 22
Troubleshooting
Troubleshooting
When Windows starts I see a LynxONE Mixer error - “No mixer device
drivers are available”.
This error will appear when the LynxONE Mixer is loading during Windows startup
and the LynxONE is not installed correctly. You should check the following items:
1. With the computer power off, verify that the card is properly seated in the PCI
slot.
2. Verify the LynxONE’s resources are not conflicting with some other device in
your system. For Windows 95/98, check in the Device Manager (Start > Control
Panel > System > Device Manager > Sound, video and game controllers >
LynxONE > Resources) to verify there are no resource conflicts. For Windows
NT check in Windows NT Diagnostics (Start > Programs Administrative Tools >
Windows NT Diagnostics > Resources) to verify there are no resource conflicts.
If there is a resource conflict, you may need to move the LynxONE to a different
slot in your computer as some motherboards have specific resources assigned to
specific slots, or change the interrupt setting in the BIOS setup screen. Please
refer to your motherboard/computer documentation to determine how to change
the interrupt for a PCI device.
I installed the LynxONE in the PCI slot before I ran Setup.exe for Windows
95/98, what do I do now?
The device manager in Windows 95/98 requires the .INF file for a device to be installed
before the Plug and Play scan to detect new hardware (which happens on each boot).
This is why Setup.exe should generally be run before you install the LynxONE into
your computer. To correct this follow the steps listed here:
1. Load the device manager by clicking on Start > Control Panel > System > Device
Manager.
2. There should be an entry called “+ ? Other Devices” listed about 3/4 down the
page. Click on the + sign. “PCI Multimedia Audio Device” should appear.
3. Click on "PCI Multimedia Audio Device", then click on "Remove".
4. A "Confirm Device Removal" dialog box should appear, click on “OK”. It might
take a couple of seconds for this dialog box to close.
5. Click on "Refresh". After several seconds, a "New Hardware Found" dialog box
will appear. Depending on your installation of Windows 95/98, another dialog
box may appear asking for setup disk. The location you need to specify is:
C:\Windows\System
Click on “OK” after entering this path.
6. You may need to reboot your machine once this completes to get everything running
properly.
The meters in the LynxONE Mixer do not show activity when I am
monitoring from the analog or digital inputs.
This is normal. The meters will show activity only when the card is in record or playback
mode while being used with a third party application. If metering is required for
monitoring, most applications offer this functionality by simply putting the card in
record mode without saving data to a disk file. However, for the lowest latency monitor
listening, use the LynxONE’s on-board monitor capabilities.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lynx ONE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lynx ONE in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info