813528
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
FEHLERBEHEBUNG
Frage/Problemstellung Lösung
Das Gerät lässt sich nicht
einschalten.
Überprüfen Sie, ob das Gerät am Strom angeschlossen ist und das Kabel
nicht beschädigt ist.
Das Moppkopf produziert
keinen Dampf.
Überprüfen Sie, ob genug Wasser im Tank ist und ob das Gerät bereits
fertig aufgeheizt ist.
Die Pads nehmen keinen
Schmutz mehr auf.
Die Pads sind voll mit Schmutz und können keinen weiteren aufnehmen.
Wechseln Sie die Pads aus.
Es treten Wasserflecken auf Das Gerät ist nicht ausreichend aufgeheizt. Wenn Sie die höchste
Dampfstufe verwenden, verbleiben Sie nicht zu lange auf einer Stelle,
um das Bilden von Kondensat (Wassertropfen) am Boden zu vermeiden.
Im erhaltenen Gerät befinden
sich Wassertropfen im Tank.
Um Ihnen die bestmögliche Qualität zu gewährleisten, werden alle
Geräte bei der Produktion getestet. Dadurch befinden sich noch
Wasserrückstände im Gerät. Diese ist völlig normal und stellt keinen
Defekt dar.
Die Pads drehen sich nicht. Überprüfen Sie, ob die Rotation aktiviert ist.
Die Pads wurden nicht richtig angebracht. Schalten Sie das Gerät ab und
lassen Sie es abkühlen. Ziehen Sie dann die Pads erneut ab und bringen
Sie die Pads dann wieder an.
Kann man mit dem Gerät
Teppiche reinigen?
Nein, wir empfehlen nicht, das Gerät zur Reinigung von Teppichen zu
verwenden.
Technische Daten: 220-240V~ 50/60Hz 1300W
EN
Intended use:
WARNING NOTE: The appliance is intended for private use only. Never use the appliance for
purposes for which it is not intended. Claims of any kind due to damage resulting from improper use are
excluded. The user bears all such risks themselves.
CAUTION:
The release button must always be pressed when attaching and detaching the mop head,
otherwise you may damage the appliance.
The functionality of the appliance was tested before shipping, so there may still be water residue
inside.
Slight droplet formation may occur during operation. This is condensation water. This is
completely normal, and does not affect functionality in any way.
SAFETY & INSTALLATION
Read these operating instructions carefully before using the electrical appliance!
Observe the safety instructions when putting the electrical appliance into operation in order to prevent
damage to property or personal injury. Follow all safety instructions to avoid damage that could result from
incorrect use! Retain this instruction manual for future reference. If the electrical appliance is passed on to
third parties, these operating instructions must also be handed over.
IMPORTANT SAFETY INSTRUCTIONS
Check that the mains voltage corresponds to the information on the type plate of the appliance.
A risk of burns exists! Improper use can lead to injuries, scalds and electric shocks.
Do not leave the appliance unattended while it is plugged in. Unplug the power cord when the appliance is
not in use and before servicing.
This appliance may only be used by children over the age of 8, by individuals with impaired physical,
sensory or mental capabilities, or by individuals not experienced or knowledgeable in the use of this
appliance provided that they are supervised or instructed on how to use this appliance safely and
understand the hazards involved.
Children must not use the appliance as a toy. Cleaning and maintenance should not be carried out by
children unless under adult supervision.
Keep the appliance and the power cord out of reach of children under the age of 8 while it is in operation
or when it is cooling down.
Never direct steam in the direction of people, animals or plants.
Do not immerse the appliance in water or other liquids.
Do not use if the power cable or plug is damaged.
If the appliance does not operate properly, or has been dropped or damaged, left outdoors or submerged
in water, it must be returned to the manufacturer or an authorized repair facility as a precautionary
measure.
Do not pull or carry by means of the cable, do not use the cable as a handle, do not close doors or
windows over the cable or wrap the cable around sharp corners or edges. Keep the cable away from
heated surfaces.
Never forcefully plug the plug into the socket.
Do not use extension cords or multi-sockets with insufficient current capacity.
Unplug after each use. To disconnect the plug safely, grasp the plug and gently remove it from the socket.
Do not pull on the cord to unplug the appliance.
Do not touch the plug or appliance with wet hands or operate without shoes.
Never insert any objects into the openings of the appliance.
Only use the mop head when the pads are properly attached.
Do not use if the water tank is empty.
Apply extra caution when using on stairs.
Store the appliance in a cool and dry place.
Always keep the area in which you are working well-lit.
Never pour hot water or other liquids, e.g. alcohol-based liquids or detergents, into the water tank. This
makes operation unsafe and will damage the appliance.
Keep the steam outlet unobstructed at all times. Keep the vents free of lint, hair, or any other possible
blockage to ensure a proper steam flow.
Use of accessories not supplied or sold by the manufacturer may result in fire, electric shock or injury.
Liquid or vapour should not be directed toward equipment containing electrical components, such as oven
interiors.
Do not expose to rain.
If you observe water leakage, cease use of the appliance and contact a qualified technician.
Do not use the appliance in an enclosed space where flammable, explosive or toxic fumes, such as paint
thinner or oil paints, could be present.
Do not use on leather, wax-polished furniture or floors, or parquet floors, synthetic fibres, velvet or other
delicate materials sensitive to water vapour.
Remove the plug from the mains before undertaking maintenance and cleaning work.
Do not touch the hot surfaces.
Use the appliance only for the purpose intended.
Caution should be exercised when using the appliance due to the emission of steam.
BEFORE FIRST USE (#2-3)
Before first use, remove any stickers, protective films or protective covers.
WARNING: Please make sure the appliance is unplugged before assembling it or changing accessories.
1. Attaching the mop head to main unit (#2): Place the mop head on the floor. Now push the end of the
main unit onto the connector on the mop head until it snaps into place. Do not use force, and pay attention
to the pins on the plug connection.
2. Assembling & fixing the telescopic pole (#3): The two parts of the aluminium tube of the telescopic
pole are pre-assembled. Open the telescopic pole latch and pull out the thinner pole of the tube, then fix
the telescopic pole into place by closing the telescopic pole latch. Attaching the handle: Now attach the
handle to the thinner end of the telescopic pole, making sure that the two pins on the handle engage in the
two holes on the telescopic pole.
3. Attaching the telescopic pole to the appliance (#4): Now insert the telescopic pole into the upper
opening on the main appliance, paying attention to the semicircular notches on the telescopic pole. The
snap lock on the rear side of the telescopic pole must point backwards.
4. Adjusting the telescopic pole (#5): Open the telescopic pole latch and slide the telescopic pole in/out
to the desired length. Fix the telescopic pole in place by closing the telescopic pole snap lock.
5. Attaching the pads (#6): The microfibre pads are attached to the mop head with 4 Velcro fasteners
each. Place the microfibre pads on the round pad holders and firmly press the edges of the pads.
USE
Floor surfaces such as marble, ceramic, stone, linoleum, sealed hardwood floors and real wood parquet can
be cleaned with the Livington Steam Twister.
Filling and inserting the water tank (#7):
1. Push the water tank release button above the water tank upwards to allow removal of the water tank.
2. Turn the water tank upside down and open the tank's screw cap. Now fill the tank with water. Use the
measuring cup if necessary. Do not remove the metal ball or hose from the water tank. Make sure
the metal ball in the water tank is always fully immersed in water during operation.
3. Close the water tank with the screw cap. Insert the water tank back into the appliance, making sure the
tank snaps firmly into place.
Note: Ordinary tap water can be used for the Livington Steam Twister. However, in areas with hard water,
we recommend using distilled water for better performance.
Note: In certain cases, the visible hose in the water tank can be kinked. This impairs the operation. You
should remove the kink from the hose.
TIP: For a particularly fresh scent when cleaning, we recommend using the Livington steam scent. This is
available as an additional accessory. Particularly suitable for households with pets. Simply add 2 to 3 squirts
into the appliance's water reservoir.
Switching on & using the appliance:
1. Plug the power cord into an earthed mains outlet. Press the steam button. The appliance will now start
heating up, the temperature display will flash red while it is heating up and the appliance will begin to tick
after a certain period of time has elapsed. Once the temperature is reached, the temperature indicator
will turn solid red and the green vapour indicator will light up. The first steam level is now activated.
Note: The appliance may drip from the time it is started up until the target temperature is reached. This
is not a malfunction, but a normal part of the heating-up process. To stop the steam emission, switch the
appliance off using the on/off switch.
2. Steam level regulation (#8): You can choose between 3 steam intensities.
GREEN steam indicator (Level 1): The first steam level is automatically activated after heating up. The
steam level indicator lights up green.
BLUE steam indicator (Level 2): Press the steam button again (for the second time), the steam level
indicator lights up green and the medium steam level is activated.
RED steam indicator (Level 3): Press the steam button again (for the third time), the steam level
indicator lights up red and the strongest steam level is activated.
To turn off the steam, press the steam button a fourth time.
3. Activating the rotation: To activate the rotation of the pads, press the rotation button after selecting the
steam level. Disabling the rotation: Press the rotation button again to deactivate the rotation.
Note: You can deactivate both the rotation and the steam completely, for example dry polishing without
steam but with rotation, or cleaning surfaces with steam only and without rotation. The rotation can only
M34868-M34871_Livington_SteamTwister_Manual_A4_20231123_BS.indd 6M34868-M34871_Livington_SteamTwister_Manual_A4_20231123_BS.indd 6 23.11.23 09:1223.11.23 09:12
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Livington M34871 SteamTwister at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Livington M34871 SteamTwister in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info