Manual Linksys BEFSR41W (page 18 of 38) (English)

602200

Zoom out

Zoom in

1/38

A DHCP (Dynamic Host Configuration Protocol) Server automatically assigns

IP addresses to each computer on your network. Unless you already have one,

it is highly recommended that your router be set up as a DHCP server.

• DHCP Server Check the Enable option to enable the DHCP server option

of the router. If you already have a DHCP server on your network, set the

router’s DHCP option to Disable.

• Starting IP Address Enter a numerical value for the DHCP server to start

with when issuing IP addresses.

• Number of DHCP Users Enter the maximum number of PCs that you want

the DHCP server to assign IP addresses to, with the absolute maximum

being 253.

• DHCP Clients Table Click on the Clients Table button to show the cur-

rent DHCP Client information. (This information is stored in temporary

memory, so the list of clients could disappear.)

Help

DHCP

Figure 6-8

EtherFast

Cable/DSL Wireless-Ready Router with 4-Port Switch

• DHCP Release Click the DHCP Release button to release the WAN IP

address from the Router.

• DHCP Renew Click the DHCP Renew button to get the new WAN IP

address from your ISP.

• DHCP Clients Table Click on the Clients Table button to show the current

DHCP Client information. (This information is stored in temporary memo-

ry, so the list of clients could disappear.)

DHCP

Instant Broadband

Series

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSR41W in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Linksys BEFSR41W Manual

Product: