486847
34
Zoom out
Zoom in
Previous page
1/46
Next page
www.lewenstein.nl
30
VERHELPEN VAN STORINGEN ELEMENTARY TROUBLESHOOTING
STORING
TROUBLE
OORZAAK
CAUSE
OPLOSSING
REMEDY
- Machine transporteert onvoldoende.
- Unable to feed cloth.
- Druk op persvoet onvoldoende.
- The presser foot has an insufficient pressure.
- Draai de persvoetschroef met de klok mee
om de druk te vergroten.
- Turn the pressure screw clockwise to increase pressure.
- Naald breekt.
- The needle breaks.
- Gebogen of botte naald.
- Naald onjuist ingezet.
- Aan stof trekken tijdens het naaien.
- The needle is bent,
or the needle point becomes dull.
- The needle is installed incorrectly.
- Pull the cloth incorrectly.
- Zet nieuwe naald in.
- Naald opnieuw inzetten.
- Stof voorzichtig onder de machine door laten gaan.
- Replace the needle with a new one.
- Re-install the needle correctly.
- Hold down the cloth gently.
- Draad breekt.
- The thread breaks.
- Onjuist ingeregen.
- Draadspanning te strak.
- Naald onjuist ingezet.
- Thread the needle incorrectly.
- The thread tangles.
- The thread tension is too tight.
- The needle is installed incorrectly.
- Use an unsuitable needle.
- Opnieuw inrijgen.
- Pas de draadspanning aan.
- Zet naald opnieuw in.
- Re-thread the needle correctly.
- Check the thread spool post, thread tree and
others, and remove the tangled threads.
- Adjust thread tension.
- Re-install the needle correctly.
- Use a suitable needle.
- Steken overslaan.
- Skipped stitches.
- Gebogen of botte naald
- Naald onjuist ingezet
- Onjuist naaldsysteem gebruikt
- Onjuist ingeregen
- Druk op persvoet onvoldoende
- The needle is bent, or the needle point
becomes dull.
- The needle is installed incorrectly.
- Use an unsuitable needle.
- The needle is threaded incorrectly.
- The presser foot has an insufficient pressure.
- Zet nieuwe naald in.
- Zet naald opnieuw in.
- Gebruik de juiste naalden (HAx1SP of 130/705H).
- Opnieuw inrijgen.
- Draai de persvoetschroef met de klok
mee om de druk te vergroten.
- Replace the needle for a new one.
- Re-install the needle correctly.
- Use a suitable needle.
- Re-thread the needle correctly.
- Turn the pressure screw clockwise to
increase the pressure.
- Onregelmatige steken.
- Bad stitches.
- Spanning niet goed afgesteld.
- The thread tension is not adjusted correctly.
- Controleer de draadspanningen.
- Adjust the thread tension.
- Plooivorming.
- The cloth wrinkles.
- Draadspanning te strak
- Draad blijft hangen
- The thread tension is too tight.
- Thread the needle incorrectly,
or the thread tangles.
- Verminder de spanning bij dunne materialen.
- Controleer inrijgen.
- Reduce the thread tension when you sew
light or thin cloth.
- Remove all the tangled threads,
and re-thread the needle correctly.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lewenstein Multilock 700de at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lewenstein Multilock 700de in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info