Select the desired device mode for the router:
Router - In this mode, this device can provide shared Internet
Access to all your LAN users. Also, by default, it acts a DHCP
Server, providing an IP address and related information to all
Wireless and LAN users.
Access Point - The device links your Wireless Stations to your
wired LAN. The Wireless stations and devices on the wired LAN
are then on the same network, and can communicate with each
other without regard for whether they are connected to the net-
work via a Wireless or wired connection.
After changing the mode, this device will restart, which will take a
few seconds. The menu will also change, depending on the mode
you are in.
The IP Address of this device. Use the default value unless the
address is already in use or your LAN is using a different IP address
range.
Operation is automatic.
NTP settings are working under Router Mode.