432422
103
Zoom out
Zoom in
Previous page
1/112
Next page
100
Chapter 8
Access Point Mode
This Chapter explains configuration and operation when in "Access
Point".
Overview
There are two modes available on the Access Point screen.
Router - In this mode, this device can provide shared Internet Access to all
your LAN users. Also, by default, it acts a DHCP Server, providing an IP ad-
dress and related information to all Wireless and LAN users.
Access Point - The device links your Wireless Stations to your wired LAN. The
Wireless stations and devices on the wired LAN are then on the same network,
and can communicate with each other without regard for whether they are con-
nected to the network via a Wireless or wired connection.
This Chapter describes operation while in Access Point Mode.
Management Connections
You need to have a DHCP Server on your LAN to provide IP addresses to the
Wireless clients using this Access Point.
This AP must be a valid device on your LAN, to allow management connections.
You must assign a (fixed) IP address which is within the address range used on
your LAN, but not within the address range used by your DHCP server.
When you connect in future, just connect normally, using the IP address you as-
signed.
1. Start your WEB browser.
2. In the Address box, enter "HTTP://" and the current IP Address of the Wireless
Router, as in this example with the default IP Address:
HTTP://192.168.0.1
3. When prompted for the User name and Password, enter admin for the user
name, and the current password, as set on the password screen.
8
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne wl router levelone wbr 6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne wl router levelone wbr 6002 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info