432422

LevelOne wl router levelone wbr 6002 Manual

110
Zoom out
Zoom in
Previous page
1/112
Next page
Appendix B - About Wireless LANs
107
WPA2-PSK
This is a later version of WPA (WPA-PSK). The major change is the use of AES
(Advanced Encryption System) for protecting data. AES is very secure, considered
to be unbreakable. The PSK (Pre-shared Key) must be entered on each Wireless
station.
If WPA2-PSK is used, the Wireless Stations and the Access Point must have
the same settings for each of the following:
WPA2 PSK
(Pre-shared Key)
Enter the same value on every station and the AP. The
PSK must be from 8 to 63 characters in length. The
256Bit key used for the actual encryption is derived
from this key.
Encryption
The same encryption method must be used. The most
common encryption method is TKIP. Another widely-
supported method is AES.
WPA-802.1x
WPA-802.1x - This version of WPA requires a Radius Server on your LAN to
provide the client authentication according to the 802.1x standard. Data transmis-
sions are encrypted using the WPA standard.
If this option is used:
The Access Point must have a "client login" on the Radius Server.
Each user must have a "user login" on the Radius Server.
Each user's wireless client must support 802.1x and provide the login data
when required.
All data transmission is encrypted using the WPA standard. Keys are automati-
cally generated, so no key input is required.
Wireless LAN Configuration
To allow Wireless Stations to use the Access Point, the Wireless Stations and the
Access Point must use the same settings, as follows:
Mode
On client Wireless Stations, the mode must be set to "Infrastruc-
ture".
(The Access Point is always in "Infrastructure" mode.)
SSID (ESSID)
Wireless Stations should use the same SSID (ESSID) as the
Access Point they wish to connect to. Alternatively, the SSID can
be set to "any" or null (blank) to allow connection to any Access
Point.
Wireless
Security
The Wireless Stations and the Access Point must use the same
settings for Wireless security. (None, WEP, WPA-PSK, WPA2-
PSK, WPA-802.1x)
… 110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne wl router levelone wbr 6002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne wl router levelone wbr 6002 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info