693399

Ksenia Lares 4.0 Manual

43
Zoom out
Zoom in
Previous page
1/58
Next page
lares 4.0 PROGRAMMING MANUAL
43
rev. 0/2018
• Forced to self-exclude: if the system is not ready, it is inserted with forced exclusion of any open areas.
Note: if there is an open area with the "non-excludable" attribute, at the time of arming mode, this zone will not be
excluded and an alarm will be generated.
Zones with the "exclusion" and "self-exclusion" attributes, if open during arming mode, will be excluded and will not
generate alarms even if they return to rest: they will be reincluded when they are switched off.
Zones with the "with reinclusion" attribute, if opened during arming mode, will be excluded and will not generate
alarms. If they go back they will be reincluded and will, therefore, be ready to generate an alarm.
Type: Output
The subtypes available are:
• Enable user: the user's account (including the code, key or remote control), if inactive, is now activated.
• Disable user: the user's account (including the code, key or remote control) is deactivated.
Type: Other
The subtypes available are:
• Clear telephone queue: cancel calls in progress.
• Alarm reset: all outputs associated with an alarm or tamper event are stopped.
This page links events (alarm, tamper, etc.) with various scenarios.
In order to configure the “Events”, i.e. the execution of the programmed scenarios (arming modes, activation of outputs,
etc.)
in the appropriate section, click on the (
) icon and then on the ( ) symbol. Then enter the various parameters:
• Type: identifies the group that generates an event (e.g. zone, partition, output, etc.).
• Subtype: this is the action related to the previous parameter (e.g. Type: Zone Subtype: zone alarm). You can make a
multiple choice with up to 15 items.
After entering the previously described two parameters, click on ( ).
At this point it is necessary to set two other parameters:
• Entity: the zone, the partition, the device, the user etc. that generates the event.
• Scenario: enter the previously programmed scenario, which will be activated when the event generated by the selected
entity occurs.
The notification types are listed below the <“Subtypes”.
Type: Zone
The subtypes available are:
• Alarm: executes the scenario when the zone generates an alarm.
• Restore: runs the scenario when the zone is restored after an alarm.
• Tamper: runs the scenario when the zone generates a tamper alarm.
• Tamper restore: runs the scenario when a tamper is restored.
• Exclusion: runs the scenario when the zone is excluded.
• Inclusion: runs the scenario when the zone is included.
• Masking: runs the scenario when the detector generates a masking alarm.
• Masking restore: runs the scenario when the detector's masking condition is restored.
• Real Time - Alarm: runs the scenario when the zone is alarmed, even with the partition switched off.
• Real time – Restoration: runs the scenario when the previous condition is restored.
Events
… 43 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info