Manual Ksenia Lares 4.0 (page 44 of 58) (English)

693399

Zoom out

Zoom in

1/58

rev. 0/2018

lares 4.0 PROGRAMMING MANUAL

Type: Partition

• Alarm: runs the scenario when the partition generates an alarm event.

• Arming mode: runs the scenario when the partition is inserted.

• Tamper: runs the scenario when the partition generates a tamper alarm.

• Switching-off: runs the scenario when the partition is switched off.

• Bell: runs the scenario when the bell is activated.

• Bell end: runs the scenario when the bell is deactivated.

• Round: runs the scenario when, following switch-off, the round time has begun.

• Round end: runs the scenario when the round time has ended,

• Entry time: runs the scenario when the entry time starts when the partition is armed.

• Entry time end: runs the scenario when, after activation, the entry time ends.

• Output time: runs the scenario when, at the time of system arming mode, the output time begins

• Output time end: runs the scenario when, at the time of system arming mode, the output time ends; the plant is now

inserted.

• Negligence: runs the scenario when the negligence time ends (if programmed in the "Partitions") page

• Failure to insert: runs the scenario when the control unit aborts the entry (e.g. area open during arming mode and the

scenario that manages the entry has the EN5013 compatible or manual exclusion attribute).

Type: Output

The subtypes available are:

• Activation: runs the scenario when the output is activated (manually by APP or via an event e.g. scenario).

• Deactivation: runs the scenario when the output is deactivated (manually by APP or via an event e.g. scenario).

Type: Peripheral

The subtypes available are:

• Tamper (BUS): runs the scenario when a BUS device generates a tamper alarm (e.g. opening of an ergo keypad).

• Tamper recovery (BUS): runs the scenario when tamper on the BUS device is restored.

• Tamper (wls): runs the scenario when a wireless device generates a tamper alarm (e.g. opening of the Poles lid)

• Tamper recovery (wls): runs the scenario when the tamper on a wireless device is restored.

• Disappearance (BUS): runs the scenario when a BUS device is no longer detected by the control panel (e.g. cable cut or

peripheral fault).

• Disappearance recovery (BUS): runs the scenario when the device returns and is detected by the control panel

(e.g. device operation reset or BUS wiring reset).

• Disappearance (wls): runs the scenario when the control panel no longer receives periodic communication from some

wireless devices.

• Disappearance recovery (wls): runs the scenario when the control panel returns to receive the periodic

communication of a previously lost wireless device.

Type: Keypad

The subtypes available are:

• Key 0: runs the scenario when the (0) key on the keypad is pressed.

• Key 1: runs the scenario when the (1) key on the keypad is pressed.

• Key 2: runs the scenario when the (2) key on the keypad is pressed.

• Key 3: runs the scenario when the (3) key on the keypad is pressed.

• Key 4: runs the scenario when the (4) key on the keypad is pressed.

• Key 5: runs the scenario when the (5) key on the keypad is pressed.

• Key 6: runs the scenario when the (6) key on the keypad is pressed.

• Key 7: runs the scenario when the (7) key on the keypad is pressed.

• Key 8: runs the scenario when the (8) key on the keypad is pressed.

• Key 9: runs the scenario when the (9) key on the keypad is pressed.

Hi
We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ksenia Lares 4.0 Manual

Product: