693399

Ksenia Lares 4.0 Manual

41
Zoom out
Zoom in
Previous page
1/58
Next page
lares 4.0 PROGRAMMING MANUAL
41
rev. 0/2018
Scenarios
Depending on the panel cut, up to 512 scenarios can be configured, all of which can be managed remotely (thus
exceeding the limit of 10 on the lares platform).
The scenarios are a set of up to 16 actions, which can freely manage outputs (activation, deactivation, switching), zones
(exclusion, inclusion, switching), users (enabling, disabling), input modes.
In order to configure the “Scenarios” click on the (
) icon and then on the ( ) symbol. Then enter the various
parameters:
• Description: this is the name associated with the scenario (e.g. alarm and external lights)
• Partitions: the scenario manages inputs, outputs, users, etc. associated with the partition.
• Scenario management by APP:
- Not visible: if this option is selected, the scenario will not be displayed in the APP neither locally nor remotely.
- With PIN (local) - With PIN (remote): in this case the scenario will be managed with a PIN both locally and
remotely.
- With PIN (local) - Unmanaged (remote): in this case the scenario will be managed locally with a PIN, however it
cannot be managed remotely.
- Without PIN (local) – Without PIN (remote): in this case the scenario will be managed without a PIN both locally
and remotely.
- Without PIN (local) - Unmanaged (remote): in this case the scenario will be managed locally without a PIN,
however it cannot be managed remotely.
- Without PIN (local) - With PIN (remote): in this case the scenario will be managed locally without a PIN, but a
code will be requested for remote management.
• Actions: in this section the actions are associated with the scenario.
When a new scenario is created, the actions are not programmed. The following menu appears:
To configure the “Actions” click on the ( ) symbol. There will appear three options to configure:
• Type: identifies the group that will be managed (e.g. zone, partition, output, etc.).
• Subtype: is the action that will affect the parameter set in “Type” (e.g. type: Zone Subtype: Zone exclusion).
• Entity: indicates in detail the zone, the partition, the device, the user etc. that is managed.
After applying the three parameters previously described, click on ( ).
To continue to configure the actions click on the (
) symbol.
In the example below and on the next page three actions have been scheduled.
When the scenario occurs, zone 1 is excluded, the green led output is activated and account 2 is enabled (this was
previously enabled, nothing changes).
… 41 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info