693399

Ksenia Lares 4.0 Manual

40
Zoom out
Zoom in
Previous page
1/58
Next page
rev. 0/2018
lares 4.0 PROGRAMMING MANUAL
40
Contact ID receivers
To program the "Contact ID receivers", click on the icon ( ) and then on the symbol ( ). Then enter the various
parameters:
• Description: the name associated with the Contact ID receiver
• Main telephone: the telephone number of the Contact ID receiver to which the control panel is connected.
• Main code: the 4-digit code that identifies the client. It is provided by the surveillance institute.
• Backup telephone: the backup telephone number of the Contact ID receiver to which the control panel is connected
• Backup code: four-digit backup code that identifies the client. It is provided by the surveillance institute.
SIA IP receivers
To program the "SIA IP receivers", click on the icon ( ) and then on the symbol ( ).
For each receiver, a possible backup receiver, on which the signals are sent in case of communication failure with the
main receiver, is also created. Then enter the various parameters:
• Description: the name associated with the SIA-IP receiver
• Enable Eth/GPRS supervision: By selecting this option, in case of availability of both Ethernet connection and GPRS,
supervisory packets are sent to the receiver using both the available communication channels alternately.
• Transmit over TCP: Selecting this option sets the use of TCP instead of UDP protocol to send signals
• Use Timestamp: If selected, this option sets the presence of information related to date and hour on the data packet.
• Communication timeout: Waiting time in seconds necessary to receive confirmation of the signal sent to the receiver
before the control panel makes a further attempt (default 5, maximum 60)
• Ethernet port: Local port on which the control panel is listening when the message is sent via Ethernet
• GPRS port: Local port on which the control panel is listening when the message is sent via Ethernet
• Eth(sec) supervision interval: The time interval in seconds between a supervisory package and the other via the
Ethernet channel.
• GPRS supervision interval: The time interval in seconds between a supervisory package and the other via the GPRS
channel.
• Supervision mode: Select which receivers should be supervised (Select the 'Only one' option if you want to supervise
only the main receiver, and 'All' if you want to supervise both)
• Protocol: Application protocol used to format the data field of the transporting protocol SIAIP DC09 (SiaLevel3,
KS-PROT for compatibility with the Vigilo receiver).
• Application Status ID: ID of the control panel's application protocol used with the current receiver.
• Transporting Layer ID: SIA-IP DC09 ID of the control panel used with the current receiver, maximum 12 hexadecimal
digits.
The device allows sending signals to a primary receiver, and possibly to an optional secondary backup. The following
data is valid for both receivers, but only mandatory for the primary receiver.
• Ethernet IP: The IP address of the receiver to be used when a message is sent via Ethernet
• Ethernet port: The remote port through which the receiver listens when a signal is sent via Ethernet
• GPRS IP: The IP address of the receiver to be used when a message is sent via GPRS
• GPRS port: The remote port through which the receiver listens when a message is sent via GPRS
• Receiver ID: SIA-IP DC09 identifier of the receiver, maximum 6 hexadecimal digits.
… 40 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ksenia-lares-4.0

Reset search

  • Hi
    We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ksenia Lares 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info