Manual Ksenia Lares 4.0 (page 32 of 58) (English)

693399

Zoom out

Zoom in

1/58

rev. 0/2018

lares 4.0 PROGRAMMING MANUAL

In this page, you can create the zones that will be associated with various devices (central, auxi etc.).

Note: some parameters (e.g. pulse number, pulse length, balancing etc.) may not be available on some devices (e.g. on

unum wireless, it is not possible to set the balancing, the number of pulses, etc.).

For convenience, all available parameters will be shown.

To program the zones, click on the icon (

) and then on the symbol ( ). From this moment, it is possible to set the

parameters of the zone:

• Description: the name given to the zone (e.g. entrance door contact, living room volumetric sensor etc.)

• Hashtags: see the Hashtags section on (page 19) of the manual. You are able to associate multiple hashtags.

• Partitions: these are the areas associated with the zone. If the zone is associated with multiple partitions, it will

generate an alarm only when it is violated and all the partitions to which it belongs are inserted.

If you imagine, for example, a control panel that manages a semi-detached villa: a contact (e.g. zone 2) is installed on

a door that leads to the entrances of the respective apartments. The apartments are, in turn, associated with partitions

(e.g. apartment 1 and apartment 2). If both partitions are armed and the zone is breached, an alarm will be generated;

otherwise, no alarm will be generated.

• Camera: selects the camera that will send the email with the snapshot. The same snapshots will also be armed in the

event log under "Image".

• Trigger camera: select the event related to the zone that will send the snapshots. Three events are available, and

multiple choices can be made:

- Zone alarm event.

- Zone tamper event.

- Zone masking event.

Device association

In this section, the zones are associated to the terminals of the main board or to one of the boards (wired, wireless and

the respective terminals) previously programmed in the BUS sections or wireless device sections.

The available items are:

1. Select the device type.

This menu identiﬁes the type of the device to which the zone will be associated.

• lares: all terminals of the lares 4.0.

• auxi/auxi 10in: all terminals on the expansion board.

• ergo-rev.0/ergo: "m1" and "m2" terminals of the ergo keypads. Not available for ergoS and ergoM.

• duo: "m1" and "m2" terminals of the duo repeaters. Not available if duo is programmed as a repeater "stand

alone".

• poli: the internal reed contact or one of the auxiliary inputs on the "m1" and "m2" terminals.

• nanus: internal reed contact.

• velum.

• nebula.

• auxi wls: i1 and i2 terminals of the wireless auxi.

2. Select the device.

In this menu, the single device belonging to the group of devices previously selected at point No. 1 is selected.

This option is not always available (e.g. if the zone is associated with lares board).

Example: A zone associated with an auxi expansion (e.g. auxi cantina) is being conﬁgured. After having programmed all

the devices (see page 20), select "auxi"/"auxi10", as described in point No. 1 of this section.

Then select the programmed device (auxi cantina) from the drop-down menu.

3. Select the terminal.

This menu allows to associate the zone to one of the device terminals.

Only the available inputs are shown.

If no terminal is shown, it means that it will no longer be possible to exploit the zones available for that device.

Zone

Hi
We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ksenia Lares 4.0 Manual

Product: