Manual Ksenia Lares 4.0 (page 29 of 58) (English)

693399

Zoom out

Zoom in

1/58

lares 4.0 PROGRAMMING MANUAL

rev. 0/2018

System

In this section, you can manage what you have created so far, creating custom events, arming modes, scenarios,

associating the zones with devices, etc.

In this page, you can create the arming modes of the partitions that will be subsequently assigned to the "Scenarios".

The scenarios will be, in turn, associated with speciﬁc "events".

To program the arming modes, click on the icon (

) and then on the symbol ( ). Then associate a label to the

arming mode (e.g. total, disarming, etc.) and set the colours that identify the arming mode of the zone.

The colours are divided as follows:

• White: no action. When the mode is activated, the status of the partition is not changed.

• Yellow: arm with delay. When the mode is activated, the partition is armed but the entry and exit times are valid

(only for the partition zones that are also delayed).

• Red: arm. When the mode is activated, the partition is armed and both entry and exit times are reset.

• Blue: switched. When the mode is activated, if the partition is armed, it is disarmed and vice versa.

Note: the switched arming mode can be used several times; in other words, it is possible to carry out the arming and

disarming cycles of the partition with a single scenario (e.g. arm disarm arm disarm etc.). If the partition is

programmed with delays, it will only be armed with delays (it is not possible to switch to an instant input).

In this example we have:

• Input 1: partitions 1 and 4 armed with delays. Partitions 2 and 3 armed instantly.

• Input 2: partitions 1 and 4 armed instantly.

The status of the partitions 2 and 3 remains unchanged (if they were previously armed they would remain armed, if

they were disconnected they would maintain this status).

• Input 3: all partitions are disarmed.

• Input 4: partitions 2 and 3 armed instantly. The status of the partition 4 remains unchanged.

If the partition 1 was disarmed, it is now armed and vice versa.

Outputs

To program the outputs, click on the icon ( ) and then on the symbol ( ). Then enter the various parameters:

• Description: the name given to the output (e.g. boiler, living room light, garage automation, etc.)

• Hashtags: see the Hashtags section in (page 19) of the manual. You are able to associate multiple hashtags.

This function is useful when you want to drive multiple outputs with an event. (e.g. you want to drive output 1, output

2 and output 3, all with the Hashtag “#outdoor lights”. In the page of scenarios, you will need to create an “outdoor

lights” scenario and then “Actions” Type: "Output" Subtype: "Output activation" Entity: "#outdoor lights".

This scenario will be associated with an event (e.g. partition alarm). Refer to the "Scenarios" section in (Page 41)

• Partitions: the exit is associated with the partitions. For example, it is useful when you want to limit the management

of the exit by the users (e.g. the system built in a semi-detached villa).

Arming modes

Hi
We have a message peripherals lost. What does this mean? Submitted on 24-7-2021 at 08:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ksenia Lares 4.0 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ksenia Lares 4.0 Manual

Product: