Manual Krups Beertender B100 (page 7 of 21) (English, French, Spanish)

611585

Zoom out

Zoom in

1/21

English

n Rinse the pour spout between uses for optimal results. Handwash with

warm soapy water. Do not wash in dishwasher - ﬁg. 21.

n To remove, unscrew turning counterclockwise from main unit. To re-attach,

simply screw back in place turning clockwise.

n You should never attempt to access internal parts of the appliance.

IMPORTANT: After cleaning, ensure all parts of your BeerTender

have

completely dried before closing the lid.

STORING THE BEERTENDER

n When the BeerTender

is not being used for a long period of time, remove

the DraughtKeg

and turn the control to “off”.

n Remove the plug from the power outlet.

n Store the BeerTender

at room temperature in a dry place out of children’s

reach.

n Protect from dust and dirt.

TROUBLESHOOTING

Problem Possible causes Remedies

The appliance does not

come on.

The appliance is not

connected to the outlet.

Connect the appliance

to the outlet.

You cannot position the

tap cover correctly.

You may have opened

the draught beer tube

(white plastic part at

the end of the serving

tube) by hand. If so, the

tap cover will not close

correctly and there is

a risk for the beer to

ﬂow out.

Before installing the

draught beer tube

onto the BeerTender

tapping mechanism,

make sure that the

draught beer tube is

closed.

The DraughtKeg

tap

or tube is not inserted

correctly.

If the draught beer

tube is not installed

properly in the tapping

mechanism or if the

tube is pinched, this

will affect the beer ﬂow.

Please refer to Section:

Using the BeerTender

System to check that

you have properly set

up the BeerTender

No beer is being

dispensed.

The DraughtKeg

empty.

Replace the

DraughtKeg

with a

new one.

There is no

DraughtKeg

inside

the BeerTender

appliance.

Install a DraughtKeg

inside the BeerTender

appliance.

The BeerTender

appliance tap handle is

not correctly

installed/positioned.

Install/position the

tap cover correctly.

You cannot close the

lid.

The tap cover has

not been positioned

correctly.

Position the tap cover

correctly.

The DraughtKeg

has not been correctly

installed.

Install the tap correctly.

Ensure the draught

tube has been installed

completely and is not

preventing the lid from

closing.

The BeerTender

appliance produces too

much foam when

dispensing beer.

The DraughtKeg

has

not reached the right

dispensing

temperature.

Allow the DraughtKeg

to cool to the right

temperature. You can

rely on the temperature

indicator on the

control panel of your

BeerTender

appliance.

The DraughtKeg

has been shaken.

Wait 4 hours before

dispensing beer.

The tap handle is being

moved too slowly.

Firmly and quickly pull

the handle down and

forward as far as it

will go.

Beer ﬂows out too

slowly.

The tap handle is not

open all the way.

Open the tap

completely.

MY b100 Has quit cooling Need the name of part that needs replacing and will put me back in business.
Thanks Submitted on 13-4-2017 at 01:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Krups Beertender B100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Krups Beertender B100 Manual

Product: