611585

Krups Beertender B100 Manual

5
Zoom out
Zoom in
Previous page
1/21
Next page
English
4
PRODUCT DESCRIPTION
BeerTender
®
components
1. BeerTender
®
at home draughting system
2. Refrigerating chamber
3. Lid
4. Lid opening handle
5. Control panel
6. Tap cover
7. Dispensing spout
8. Beer tap handle
9. Drip grate
10. Drip tray
11. Main power switch
12. Power cord with plug
Other Components
13. 5 Liter DraughtKeg
TM
(not included)
14. Replaceable Draught Beer tube (Should be changed with each new
DraughtKeg
TM
) (5 included with purchase)
BEFORE USE
CHILD SAFETY LOCK
n Make sure that children can not play with the appliance.
n Do not leave the materials used to pack the appliance within children’s
reach.
n To prevent children from using the appliance, you can remove the tap
handle. To remove the handle, make sure that it is in an upright position and
pull upward - fig. 1.
FIRE PREVENTION
n In the event of a fire, use carbon dioxide (CO2) extinguishers.
n Do not use water or powder extinguishers.
SETUP AND MAINTENANCE
n Install the BeerTender
®
in an upright position in a safe place.
To ensure that the BeerTender
®
works correctly and efficiently, the following
is strongly advised:
n Place it on a perfectly level and stable surface.
n Choose a clean, well-lit area with an easily accessible electric socket.
n Keep the appliance at a minimum distance (4 inches) from the stove as
shown in the diagram - fig. 2.
n Keep the appliance at a minimum distance (2 ½ inches) from the walls.
n Store the DraughtKeg
TM
at room temperature or in the refrigerator.
n Make sure the BeerTender
®
is not exposed to direct sunlight.
n Do not use the BeerTender
®
outdoors.
n Do not place the BeerTender
®
on very hot surfaces or near open flames, as
these may melt or damage the casing.
n Your BeerTender
®
uses a technology that delivers ultimate cooling results
when the ambient temperature is between 54°F and 86°F. At colder
temperatures, the appliance cooling system could be damaged. At
warmer temperatures, the cooling system will not be able to reach the pre-
programmed temperature - fig. 3.
WARNING! To avoid overheating, always keep the BeerTender
®
appliance
out of direct sunlight. To obtain good cooling performance, never install your
machine in a room with an ambient temperature above 86°F.
USING THE BEERTENDER
®
SYSTEM
n Always hold the appliance by the bottom edge when lifting - fig. 4.
n To obtain draught beer of optimal quality you should keep two basic factors
in mind, the temperature of the beer and hygienic conditions. Follow these
few simple steps for the ideal use of BeerTender
®
.
A new draught beer tube should be used with each DraughtKeg
TM
.
A bag of 5 tubes is included with the BeerTender
®
appliance. To order
additional beer tubes, please contact www.beertender.com or call
1-888-KRUPS.
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

krups-beertender-b100

Reset search

  • MY b100 Has quit cooling Need the name of part that needs replacing and will put me back in business.
    Thanks Submitted on 13-4-2017 at 01:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Krups Beertender B100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Krups Beertender B100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info